Medentika Adapter - Planmeca PlanMill 50 S User Manual

7.2.1.4 Calculation and data transfer

7.2.2 Medentika adapter

7.2.2.1 General cleanliness and handling
User's manual
Take the following measurements with a precision of 10 μm and send the
results to your local dealer to be inserted into the offset calculation program.
• Position 2:
• Position 5:
The offset values for the Planmeca PlanCAM software are determined after
the measurement results are entered into the calculation program.
Please contact the local dealer of your Planmeca PlanCAM software to
implement the offset data.
The adapter has to be calibrated in Planmeca PlanMill 50 S milling units
before the first use to ensure an optimal positioning of the Medentika
system. Therefore the following aspects must be considered:
• Cleanliness of the blank adapter (milling unit) and of the Medentika
adapter
• General Cleanliness
7 Adapters
Planmeca PlanMill 50 S 37