Loading Tool Magazine - Planmeca PlanMill 50 S User Manual

8 Operating milling unit

8.12 Loading tool magazine

56 Planmeca PlanMill 50 S
7. Confirm your choice in the Edit tool field window by clicking the green
Confirm button.
8. The updated tool information should be visible in the Status indicator
field and at tool position line.
For more information on editing tool information, see section "Tool fields"
on page 67.
NOTE
The list of approved tools can be found in section "Milling tools" on page 21.
Only use milling tools from Planmeca. The milling tools from Planmeca are
ready-ringed in the correct projecting length and are available from the local
dealer.
The tool magazine for this milling unit can be equipped with max. 12 tools.
Each available tool position can be assigned an arbitrary tool type.
In order to equip the tool magazine with tools, proceed as follows:
1. Stop all drives and the spindle.
2. Open the lid by pressing the lid button.
3. Put on protective gloves.
User's manual