Table of Contents
Advertisement
12 Troubleshooting
12 Troubleshooting
12.1 Troubleshooting safety
12.1.1 Electrical systems
12.1.2 Moving parts
96
Planmeca PlanMill 50 S
WARNING
Isolate from the power supply before starting troubleshooting on electrical
parts. Contact with live conductive parts can be fatal. Parts under power may
make unexpected movements and lead to serious injury.
WARNING
Switch off all of the unit's moving parts before starting troubleshooting on
moving parts and wait until they have all come to a standstill. Mortal danger
due to moving parts. Rotating or linearly moving parts can cause serious
injuries.
WARNING
Risk of injury due to improper troubleshooting. Improperly conducted
troubleshooting measures can cause serious injury and significant damage.
•
Before beginning the work ensure that sufficient free space is available
for the work.
•
Keep the installation site clean and orderly. Loosely stacked or scattered
parts and tools are potential causes of accidents.
•
After removing parts ensure that you reassemble them correctly and that
you use all parts were removed.
•
Before starting for the first time be sure to observe the following:
•
Ensure that the installation work is safely carried out and completed
in accordance with the specifications and directives in these safety
instructions.
•
Make sure that all covers and safety devices are installed and
working properly.
WARNING
Contact with live conductive parts can be fatal. Parts under power may make
unexpected movements and lead to serious injury.
Isolate from the power supply before starting troubleshooting on electrical
parts.
WARNING
Rotating or linearly moving parts can cause serious injuries.
Switch off all of the machine's moving parts before starting troubleshooting
on moving parts and wait until they have all come to a standstill.
User's manual
Advertisement
Table of Contents
Troubleshooting
