Explanation Of Symbols On The Monitor - EDAN M3 User Manual

M3 Vital Signs Monitor User Manual
11 If the monitor gets damp, put it in dry circumstance to dry it until it can work normally.
If liquid pours on the monitor, please contact the service personnel authorized by
EDAN.
12 Setting alarm limits to extreme values can render the alarm system useless.
13 A potential hazard can exist if different alarm presets are used for the same or similar
equipment in any single area.
NOTE:
1 Position the device in a location where the operator can easily see the screen and
access the operating controls.
2 The monitor can only be used on one patient at a time.
3 The equipment is calibrated to display functional oxygen saturation.
4 This equipment is not intended for family usage.
5 If the device is discolored or damaged, then discontinue use of the device.
6 The pictures and interfaces in this manual are for reference only.
7 Regular preventive maintenance should be carried out every two years. You are
responsible for any requirements specific to your country.

1.2.7 Explanation of Symbols on the Monitor

CAUTION
This symbol indicates that the equipment is IEC/EN60601-1
Type CF equipment. The unit displaying this symbol
contains an F-Type isolated (floating) patient applied part
providing a high degree of protection against shock. It is not
suitable for use during defibrillation.
This symbol indicates
IEC/EN60601-1 Type BF equipment. The unit displaying
this symbol contains an F-Type isolated (floating) patient
applied part providing a high degree of protection against
shock, and is suitable for use during defibrillation
This symbol indicates
IEC/EN60601-1 Type BF equipment. The unit displaying
this symbol contains an F-Type isolated (floating) patient
applied part providing a high degree of protection against
shock. It is not suitable for use during defibrillation.
- 5 -
Intended Use and Safety Guidance
that the instrument
that the instrument
is
is