Procedures To Install And Wire Options On A Drive; Procedure A - YASKAWA CC-Link SI-C3 Installation Manual

NOTICE
the drive and connecting peripheral devices. Incorrect connections can cause damage to the option.
◆

Procedures to Install and Wire Options on a Drive

Procedures to install and wire the option are different for different drive models.
Refer to the following table to check the procedures to install and wire the option on a
drive.
Table 5.1 Procedures to Install and Wire Options on a Drive
Drive
A1000
D1000
U1000
Z1000U
GA500
GA700
GA800
*1 To install the option on GA500 drives, use the option mounting kit (JOHB-GA50) and manual.
■

Procedure A

This section shows the procedure to install and wire the option on a 1000-series drive.
Prepare the Drive for the Option
Before you install the option on a YASKAWA Energy-Saving Unit D1000, make sure that
the option software version is PRG: 0106 or later.
Correctly wire the drive as specified by the manual packaged with the drive. Make sure
that the drive functions correctly. Refer to the drive manuals for more information.
YASKAWA TOEP C730600 83A CC-Link Installation Manual
Damage to Equipment. Make sure that all connections are correct after you install
Procedures to Install and Wire
Options on a Drive
Procedure A
Procedure A
Procedure A
Procedure A
*1
Procedure B
Procedure B
5 Installation Procedure
Reference Page
17
17
17
17
-
23
23
17