Table of Contents
Advertisement
*1
The option must be configured with a termination resistor. Refer to
page 33
for more information.
*2
Make sure that the FG terminal on the master drive is grounded properly.
*3
Connect the included ground wire for installations on 1000-series drives and GA500 drives.
The ground wire is not necessary for installation on GA700 or GA800 drives.
◆
Communication Cable Specifications
WARNING
Connections that are too loose or too tight can cause incorrect operation and damage to the drive.
Incorrect connections can also cause death or serious injury from fire.
YASKAWA TOEP C730600 83A CC-Link Installation Manual
Figure 5.16 Using Multiple Drives
Fire Hazard. Tighten all terminal screws to the correct tightening torque.
5 Installation Procedure
Termination Resistor Connection on
31
Advertisement
Chapters
Table of Contents
