YASKAWA E-V Series User Manual page 137

Step Display After Operation
9
or
10
11
Note: If the following events occur while a parameter is being edited, the utility function is ended forcibly before the
results are confirmed, and the status is displayed in the panel. If this occurs, execute the utility function again.
• If an alarm occurs while the utility function is being executed from the panel operator
• If a digital operator is connected to the SERVOPACK
8.4 Safety-related Servo Parameter Updating (Fn042)
Keys
Press the DATA/SHIFT Key for at least one second to
display the screen on the left.
MODE/SET DATA/
Press the DATA/SHIFT Key for at least one second to
display the screen on the left.
Repeat the operation in Step 4 to 10 and update all the
MODE/SET DATA/ mismatched parameters.
Press the DATA/SHIFT Key for at least one second to
return to the utility function selection screen.
MODE/SET DATA/
(cont'd)
Operation
8-11