ル警告灯(レッド)が点灯して、その状
態を知らせます。
ウィンカーライトのアラーム
メーターパネルがウィンカーライトの故
障を検出すると、ウィンカーライトイン
ジケーターが高速で 2 回点滅して、デジ
タルディスプレイに故障が通知されま
す。
02̲16
アラーム - トランスミッション
トランスミッションユニットに接続され
ているギアシフトコントロールとモード
コントロールアラームの場合、アラーム
のタイプによって、ディスプレイに 3 種
類のシンボルが表示されます: F、H、M
F は"フット"(フットコントロール) 、H
は"ハンドル"(ハンドルコントロール) 、
M は"モード"(ギアモードの選択)を表
02̲17
します。
トランスミッションユニット関連のアラ
ームの場合、ジェネラル警告灯が点灯
し、 「GEAR 」の文字が表示されます。
注意
ハンドル上のコントロールをオフにして
も、H シンボルがデジタルディスプレイ
に表示されます。
02̲18
ベルト摩耗アラーム
general warning light turns on to
signal this condition.
Turn indicator alarms
When the instrument panel detects a
failing turn indicator, the turn
indicator warning light flashes
twice as fast and the problem is
signalled on the digital display.
Alarms - transmission
In case of alarms for gearshift
controls and mode control connected
to the transmission ECU, three kinds
of symbols are shown on the display,
according to the nature of the
alarm: F, H and M.
F stands for "foot" (foot control),
H stands for "handlebar" (handlebar
control) and M is for "mode" (gear
mode selection).
In case of alarms related to the
transmission ECU, the general alarm
warning light is lit and the display
shows the word GEAR.
CAUTION
IN CASE THE HANDLEBAR CONTROLS ARE
DISABLED, THE H SYMBOL WILL BE ALSO
SHOWN ON THE DIGITAL DISPLAY.
Worn belt alarm
31