Software Update Menu - Viavi ATC-5000NG Operation Manual

3.8.1

SOFTWARE UPDATE MENU

Allows the user to update the DSP software or the FPGA firmware.
Software Update Process:
Kernel and Touch Screen software are updated.
Kernel and Touch Screen software are executed.
Touch Screen software automatically starts in the Software Update Menu and programs all necessary
DSP software and FPGA firmware for the updated software. If update fails because of an update failure,
place the cursor in the Selected Programming Script File textbox on the top of the screen and press Alt
S. The Touch Screen software reads the last valid configuration file and displays all the valid FPGA and
DSP versions.
Figure 1.2.3 - 75 System Menu, Software Update Menu
Screen Components
Firmware
Current Version
Programming
New Version
1-2-3
Page 108
Description
Displays the Firmware Device Name.
Displays the Current Version Number.
Allows the user to enable/disable the programming of a specific
DSP or FPGA device.
Displays the New Version Number.
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Operation, Menus and Screens
System Menu
Rev. L0
February 2020