Viavi ATC-5000NG Operation Manual page 282

5.9.17.3.5 TABLE ENTRY ANTENNA POWER DEVIATION
Command Syntax:
Description:
Table Entry:
Numeric:
Default:
Example:
Query:
Return:
5.9.17.3.6 TABLE ENTRY ANTENNA TIME DEVIATION
Command Syntax:
Description:
Table Entry:
Numeric:
Default:
Example:
Query:
Return:
5.9.17.3.7 TABLE ENTRY ENABLE
Command Syntax:
Description:
Table Entry:
Default:
Example:
Query:
Return:
Rev. L0
February 2020
{:ATC |:ATC5000NG}{:XPDR}{:ITABLE:}<table entry>{:ANT |:ANTENNA}{:POW
|:POWER}SP<numeric>CR
This command sets the antenna power deviation between the top and bottom antenna of the
selected table entry.
1 to 1000 (decimal ASCII)
-20 to 20 dB (decimal ASCII)
0
:ATC:XPDR:ITABLE:2:ANT:POW -19\r
:ATC:XPDR:ITABLE:2:ANT:POW?\r
-19.0
{:ATC |:ATC5000NG}{:XPDR}{:ITABLE:}<table entry>{:ANT |:ANTENNA}{:TIM
|:TIME}SP<numeric>CR
This command sets the antenna time deviation between the top and bottom antenna of the
selected table entry.
1 to 1000 (decimal ASCII)
-0.975 to 0.975 µs (decimal ASCII)
0
:ATC:XPDR:ITABLE:1:ANT:TIM 0.5\r
:ATC:XPDR:ITABLE:1:ANT:TIM?\r
0.5
{:ATC |:ATC5000NG}{:XPDR}{:ITABLE:}<table entry>{:ENABLE}SP{ON | OFF}CR
This command turns on or off the interrogation of the selected table entry.
1-1000 (Decimal ASCII)
ON
:ATC:XPDR:ITABLE:1:ENABLE OFF\r
:ATC:XPDR:ITABLE:1:ENABLE?\r
OFF
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Operation, Remote Operation
Transponder Commands
1-2-5
Page 119