Viavi ATC-5000NG Operation Manual page 223

5.7.2.14 POSITION PARAMETERS
The following set of commands allows the user to define the intruder (target) initial position and, if the
intruder is dynamic, the movement direction of the intruder.
5.7.2.14.1 ALTITUDE
5.7.2.14.2 BEARING
Command Syntax:
Description:
Numeric:
Default:
Example:
Command Syntax:
Description:
Numeric:
Default:
Example:
5.7.2.14.3 LATITUDE
Command Syntax:
Description:
Numeric:
Default:
Example:
5.7.2.14.4 LONGITUDE
Command Syntax:
Description:
Numeric:
Default:
Example:
1-2-5
Page 60
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:}<intruder
no>{:ALT |:ALTITUDE}SP{NODATA|<numeric>}CR
This command sets the selected intruder to the specified altitude. If altitude data is not available,
use the "NODATA" keyword.
Altitude Binary Mode: -1000 to 50175 feet in 25 feet resolution (decimal ASCII)
Altitude Gilham Mode: -1000 to 126700 feet in 100 feet resolution (decimal ASCII)
1000 feet
:ATC:SCE:STAT:1:ALT 3000\r
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC: }<intruder
no>{:BEA |:BEARING}SP<numeric>CR
This command sets the selected intruder to the specified bearing from own aircraft.
0 to 359 degrees (decimal ASCII)
0 True North
NOTE:
latitude and longitude. If the intruder is defined using range and bearing, the ATC-5000NG
calculates the latitude and longitude of the intruder. If the intruder is defined using latitude and
longitude, the ATC-5000NG calculates the range and bearing.
0
:ATC:SCE:DYN:2:BEA 45\r
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:}<intruder
no>{:LAT |:LATITUDE}SP<numeric>CR
This command sets the selected intruder to the specified latitude.
-90 to 90 degrees (double ASCII)
NOTE:
latitude and longitude. If the intruder is defined using range and bearing, the ATC-5000NG
calculates the latitude and longitude of the intruder. If the intruder is defined using latitude and
longitude, the ATC-5000NG calculates the range and bearing.
Calculated using the range and bearing and the own aircraft position.
:ATC:SCE:DYN:1:LAT 89.9\r
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:}<intruder
no>{:LONG |:LONGITUDE}SP<numeric>CR
This command sets the selected intruder to the specified longitude.
-180 to 180 degrees (double ASCII)
NOTE:
latitude and longitude. If the intruder is defined using range and bearing, the ATC-5000NG
calculates the latitude and longitude of the intruder. If the intruder is defined using latitude and
longitude, the ATC-5000NG calculates the range and bearing.
Calculated using the range and bearing and the own aircraft position.
:ATC:SCE:DYN:1:LONG -45.6123\r
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
The intruder can be defined by range and bearing or
The intruder can be defined by range and bearing or
The intruder can be defined by range and bearing or
Operation, Remote Operation
Scenario Commands
Rev. L0
February 2020