Multi-Receiver Settings Menu - Viavi ATC-5000NG Operation Manual

Screen Components
Transmitter Softkey
Scenario Softkey
3.4.1

MULTI-RECEIVER SETTINGS MENU

The Multi-Receiver Settings Menu allows the user to configure the Transmitter, Receiver and Antenna
Simulator modules within the Test Set for Multi-Receiver tests. The Multi-Receiver Settings Menu is
mainly used for testing and troubleshooting of the Test Set.
Figure 1.2.3 - 3 Multi-Receiver Settings Menu
Screen Components
Power Mode
ON/OFF
Frequency
Power
Path
Modulation
1-2-3
Page 12
Description
Allows the user to perform either DO-260 Tests or Block
Transmissions.
Allows the user to design and execute a Scenario Test.
Description
Allows the user to select the Power Mode.
Allows the user to enable/disable the Transmitter.
Allows the user to select the Transmitter frequency.
Allows the user to set the Transmitter power.
Allows the user to select the Transmitter Path (Antenna Port).
Allows the user to select the Modulation.
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Operation, Menus and Screens
Multi-Receiver Menu
Rev. L0
February 2020