Viavi ATC-5000NG Operation Manual page 240

Atc/dme test set
Table of Contents

Advertisement

5.7.2.21.1.O
TRUE/MAGNETIC HEADING TYPE
Command Syntax:
Description:
Numeric:
Default:
Example:
5.7.2.21.1.P
VELOCITY TYPE
Command Syntax:
Description:
Numeric:
Default:
Example:
5.7.2.21.1.Q
VERTICAL RATE INFORMATION AVAILABLE
Command Syntax:
Description:
Default:
Example:
5.7.2.21.1.R
VERTICAL SPEED
Command Syntax:
Description:
Numeric:
Default:
Example:
Rev. L0
February 2020
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:}<intruder
no>{:VELHRD}SP<numeric>CR
This command sets the selected intruder velocity squitter true/magnetic heading type field to the
specified value.
0 to 1 (decimal ASCII)
Value
0
1
0
:ATC:SCE:DYN:1:VELHRD 1\r
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:}<intruder
no>{:VELTYPE}SP<numeric>CR
This command sets the selected intruder velocity squitter to the specified type, if the intruder is
an extended Mode S.
0 to 7 (decimal ASCII)
Value
0
1
2
3
4
5
6
7
1
:ATC:SCE:DYN:2:VELTYPE 3\r
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:}<intruder
no>{:VRV}SP{ON | OFF}CR
This command enables or disables the vertical rate information of the specified intruder. When
set to OFF, no vertical rate information is available.
On
:ATC:SCE:DYN:2:VRV OFF\r
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:}<intruder
no>{:VERT |:VERTICAL}SP<numeric>CR
This command sets the selected intruder vertical speed.
-32704 to 32704 feet per minute (decimal ASCII)
NOTE:
velocity squitter of an extended Mode S when the intruder is a static intruder.
0
:ATC:SCE:DYN:1:VERT 50\r
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Meaning
True North
Magnetic North
Velocity Type
Subtype 0 - Reserved
Ground Speed Normal
Ground Speed Supersonic
Airspeed Heading Normal
Airspeed Heading Supersonic
Subtype 5 - Reserved
Subtype 6 - Reserved
Subtype 7 - Reserved
The vertical speed information is only used for the
Operation, Remote Operation
Scenario Commands
1-2-5
Page 77

Advertisement

Table of Contents
loading

This manual is also suitable for:

138156

Table of Contents