Figure 1.2.3 - 55; Dme Settings Menu - Viavi ATC-5000NG Operation Manual

3.6.1

DME SETTINGS MENU

Allows the user to configure modules in the Test Set for DME tests. The DME Settings Menu is used for
testing and troubleshooting of the Test Set.
Figure 1.2.3 - 55 DME Settings Menu
Screen Components
Antenna Power Switch
ON/OFF
Frequency
Power
Path
Modulation
1-2-3
Page 82
Description
Allows the user to select one of three transmit power ranges
(Normal, 20 dB Amplifier or 20 dB Attenuator).
Allows the user to enable/disable the Signal Generator.
Allows the user to select the Transmitter frequency.
Allows the user to set the Transmitter power.
Allows the user to select the Transmit Path (Top or Bottom
Antenna port).
Allows the user to select CW or Pulse Modulation.
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Operation, Menus and Screens
DME Menu
Rev. L0
February 2020