Viavi ATC-5000NG Operation Manual page 260

5.7.5.2.2 INFORMATION FRAME DATA
Command Syntax:
Description:
Example:
5.7.5.2.3 INFORMATION FRAME TYPE
Command Syntax:
Description:
Numeric:
Example:
Rev. L0
February 2020
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC:}<intruder
no>{:UAT}{:GUS}{:IFRAME:}<frame no>{:IFDATA}
SP{{TEXT,<text>}|{HEX,<numeric>}|{FILE,<pathname>}}CR
This command sets the frame data content for the selected intruder. The <intruder no> specifies
the number of the intruder in the channel grouping specified. The <frame no> specifies the
number of the information frame. The source of the frame data content is from an alphanumeric
string (TEXT), a hexadecimal string (HEX) or a file (FILE).
{TEXT,<text>}
<text> text ASCII
{HEX,<numeric>}
<numeric> hexadecimal ASCII
{FILE,<pathname>}
<pathname> text ASCII. For a correct pathname replace the ":" character next to the driver letter
with the ".." character.
:ATC:SCE:STAT:2:UAT:GUS:IFRAME:2:IFDATA HEX,4441544153414d504c45\r
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC:}<intruder
no>{:UAT}{:GUS}{:IFRAME}<frame no>{:IFTYPE}SP<numeric>CR
This command sets the frame data format for the selected intruder. The <intruder no> specifies
the number of the intruder in the channel grouping specified.
0 to 15 (decimal ASCII)
:ATC:SCE:STAT:1:UAT:GUS:IFRAME:2:IFTYPE 2\r
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Operation, Remote Operation
Scenario Commands
1-2-5
Page 97