Multi-Receiver Menu - Viavi ATC-5000NG Operation Manual

3.4

MULTI-RECEIVER MENU

The Multi-Receiver Menu allows the user to perform DO-260 tests and also allows the user to set up
scenarios that output 1090 messages (ADS-B), 1030 interrogations (Mode S and ATCRBS) and UAT
messages (Airborne and Groundlink) simultaneously on an antenna port.
Figure 1.2.3 - 2 Multi-Receiver Menu
Screen Components
Settings Softkey
Measurements Softkey
Own Aircraft Softkey
RTCA/DO-260 Tests Softkey
Receiver Softkey
Rev. L0
February 2020
Description
Allows the user to set Generator parameters and troubleshoot
the Test Set.
Allows the user to view the transmissions of the UUT and to
perform pulse characteristic, frequency and phase
measurements.
Allows the user to change the Own Aircraft information if set to
Manual.
If not set to manual entry, the user Own Aircraft information from
the selected source is displayed in the TCAS Menu.
Allows the user to perform RTCA/DO-260 Tests.
Allows the user to select messages to capture and log from the
UUT or the Test Set.
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Operation, Menus and Screens
Multi-Receiver Menu
1-2-3
Page 11