Viavi ATC-5000NG Operation Manual page 24

SERVICE UPON RECEIPT OF MATERIAL
Unpacking
Special-design packing material inside the shipping container provides maximum protection for the
ATC-5000NG. Avoid damaging the shipping container and packing material during equipment unpacking.
Use the following steps for unpacking the ATC-5000NG.
1 Cut and remove the sealing tape on top of the shipping container and open the shipping container.
2 Remove the top packing mold.
3 Remove ATC-5000NG and packing material from the bottom packing mold.
4 Remove the protective plastic bag from the ATC-5000NG and inspect the contents.
5 Place the protective plastic bag and packing material inside the shipping container.
6
Store the shipping container for future use should the ATC-5000NG need to be returned/shipped.
Figure 1 Packaging Diagram
Rev. L0
February 2020
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details. Page i