5.9.14
STOP TRANSMISSION
Command Syntax:
Description:
Example:
Query:
5.9.15
SUPPRESSION OUTPUT
Command Syntax:
Description:
Default:
Example:
Query:
Return:
5.9.16
SUPPRESSION PERCENTAGE
Command Syntax:
Description:
Numeric:
Default:
Example:
Query:
Return:
5.9.17
TRANSMISSION MODES
5.9.17.1
BLOCK TRANSMISSION
This set of commands allows the user to define block of messages to be transmitted.
5.9.17.1.1
BLOCK PARAMETERS
5.9.17.1.1.A
FRAME PERIOD
Command Syntax:
Description:
Numeric:
Default:
Example:
Query:
Return:
1-2-5
Page 108
{:ATC |:ATC5000NG}{:XPDR}{:STO |:STOP}CR
This command stops a test.
:ATC:XPDR:STO\r
No – See INTERROGATION ON/OFF
{:ATC |:ATC5000NG}{:XPDR}{:SUP |:SUPPRESSION}SP{ON |OFF}CR
This command turns on or off the suppression output of the unit.
Off
:ATC:XPDR:SUP ON\r
ON
{:ATC |:ATC5000NG}{:XPDR}{:SUPPERC |:SUPP}SP<numeric>CR
This command sets the suppression percentage.
0 to 100 (Decimal ASCII)
0
:ATC:XPDR:SUPP 100\r
:ATC:XPDR:SUPP?\r
100
{:ATC |:ATC5000NG}{:XPDR}{:TXBLOCK}{:PERIOD }SP<numeric>CR
This command defines the block transmission period in ms.
10 to 90000 (decimal ASCII)
100
:ATC:XPDR:TXBLOCK:PERIOD 10\r
:ATC:XPDR:TXBLOCK:PERIOD?\r
10
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Operation, Remote Operation
Transponder Commands
Rev. L0
February 2020