Block Transmission - Viavi ATC-5000NG Operation Manual

5.6.11.3 RANDOM POSITION WIDTH
Command Syntax:
Description:
Numeric:
Example:
Default:
Query:
Return:
5.6.11.4 RANDOM STARTING POSITION
Command Syntax:
Description:
Numeric:
Example:
Default:
Query:
Return:
5.6.12

BLOCK TRANSMISSION

This set of commands allows the user to define a transmission block of messages to periodically transmit
to the unit under test. This set of commands is for block transmissions under the Multi-Receiver Menu. In
order for these commands to work the Scenario Type must be set to Multi-Receiver.
5.6.12.1 BLOCK PARAMETERS
5.6.12.1.1 FRAME PERIOD
Command Syntax:
Description:
Numeric:
Default:
Example:
5.6.12.1.2 HIT
Command Syntax:
Description:
Numeric:
Default:
Example:
1-2-5
Page 30
{:ATC |:ATC5000NG}{:DO260}{:TIMING}{:TRIGGER |:TRIG}{:RANDOM}{:WIDTH
|:WID}SP<numeric>CR
This command sets the width of the random pulse in ns. This command is valid only if the trigger
mode is Random.
0 to 120000 ns (decimal ASCII).
:ATC:DO260:TIMING:TRIG:RANDOM:WID 120000\r
120000 ns
:ATC:DO260:TIMING:TRIG:RANDOM:WID?\r
120000
{:ATC |:ATC5000NG}{:DO260}{:TIMING}{:TRIGGER |:TRIG}{:RANDOM}{:POSITION
|:POS}SP<numeric>CR
This command sets the relative delay of the random pulse in ns. This command is valid only if the
trigger mode is Random.
-120000 to 120000 ns (decimal ASCII).
:ATC:DO260:TIMING:TRIG:RANDOM:POSITION 0\r
0
:ATC:DO260:TIMING:TRIG:RANDOM:POSITION?\r
0
{:ATC |:ATC5000NG}{:TXBLOCK}{:PERIOD }SP<numeric>CR
This command defines the block transmission period in ms.
10 to 90000 (decimal ASCII)
100
:ATC:TXBLOCK:PERIOD 10\r
{:ATC |:ATC5000NG}{ :TXBLOCK}{:HIT }SP<numeric>CR
This command sets the number of consecutive blocks to transmit.
0 to 20 (decimal ASCII)
1
:ATC:TXBLOCK:HIT 6\r
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Operation, Remote Operation
RTCA/DO-260 Test Commands
Rev. L0
February 2020