Figure 1.2.3 - 58 - Viavi ATC-5000NG Operation Manual

3.6.2.2 Measurement Mode
Figure 1.2.3 - 58 DME Measurements, Scope Measurement Mode
Screen Components
Measurements/Scope
Measurement Type
Pulse Characteristic
Ch1
Trigger Source
Trigger Level
Trigger Mode
Trigger Antenna
Preset Softkey
1-2-3
Page 86
Description
Allows the user to perform a measurement or set the scope to
view a received waveform.
Allows the user to select the Measurement Type.
Pulse Measurement is the only Measurement Type supported.
Allows the user to select the Pulse to be measured.
Allows the user to select the Channel 1 selection.
Allows the user to select the Trigger Source.
Log Video is the only Trigger Source available in the DME
instrument.
A slider bar allows the user to select the Log Video Trigger
level.
Allows the user to set the Trigger Mode to Normal or Single
Trigger.
Allows the user to select the Trigger Antenna.
Allows the user to set the fields to preset levels and selections.
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Operation, Menus and Screens
DME Menu
Rev. L0
February 2020