Viavi ATC-5000NG Operation Manual page 233

5.7.2.19.1.T TARGET ALTITUDE CAPABILITY
Command Syntax:
Description:
Numeric:
Default:
Example:
5.7.2.19.1.U TARGET ALTITUDE/SELECTED ALTITUDE
Command Syntax:
Description:
Numeric:
Default:
Example:
5.7.2.19.1.V TARGET HEADING/TRACK INDICATOR
Command Syntax:
Description:
Numeric:
Default:
Example:
5.7.2.19.1.W TCAS OPERATIONAL
Command Syntax:
Description:
Numeric:
Default:
Example:
1-2-5
Page 70
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:}<intruder
no>{:STARGET}{:ACAP}SP<numeric>CR
This command sets the selected intruder target state and status squitter target altitude capability
flag field to the specified value, if the intruder is an extended Mode S.
0 to 3 (decimal ASCII)
Value
0
1
2
3
0
:ATC:SCE:STAT:1:STARGET:ACAP 3\r
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:}<intruder
no>{:STARGET}{:TALT}SP{NODATA |<numeric>}CR
This command sets the selected intruder target state and status squitter target altitude or MCP/
FMS selected altitude field to the specified value, if the intruder is an extended Mode S.
-1000 to 100,000 (decimal ASCII)
0
:ATC:SCE:STAT:1:STARGET:TALT 10\r
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:}<intruder
no>{:STARGET}{:THTI}SP<numeric>CR
This command sets the selected intruder target state and status squitter target heading/track
indicator field to the specified value, if the intruder is an extended Mode S.
0 to 1 (decimal ASCII)
Value
0
1
0
:ATC:SCE:DYN:1:STARGET:THTI 1\r
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:}<intruder
no>{:STARGET}{:TOP}SP<numeric>CR
This command sets the selected intruder target state and status squitter TCAS operational field
to the specified value, if the intruder is an extended Mode S.
0 to 1 (decimal ASCII)
Value
0
1
0
:ATC:SCE:DYN:1:STARGET:TOP 1\r
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Meaning
Capability for reporting holding altitude only
Capability for reporting either holding altitude or autopilot
control panel selected altitude
Capability for reporting either holding altitude, autopilot control
panel selected altitude or any FMS/RNAV level-off altitude
Reserved
Meaning
Target Heading Angle being reported
Target Track Angle being reported
Meaning
TCAS not Operational (RI ≠ 3 or 4)
Approach Mode Active (RI =3 or 4)
Operation, Remote Operation
Scenario Commands
Rev. L0
February 2020