Viavi ATC-5000NG Operation Manual page 250

5.7.4.5 LATERAL AXIS GPS ANTENNA OFFSET
Command Syntax:
Description:
Numeric:
Default:
Example:
5.7.4.6 LONGITUDINAL AXIS GPS ANTENNA OFFSET
Command Syntax:
Description:
Numeric:
Default:
Example:
5.7.4.7 MSO
Command Syntax:
Description:
Numeric:
Example:
Rev. L0
February 2020
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:} <intruder
no>{:UAT}{:GPSLAT}SP<numeric>CR
This command sets the lateral axis GPS antenna offset of the specified intruder. The <intruder
no> specifies the number of the intruder in the channel grouping specified.
0 to 7 (decimal ASCII)
Value
0
1
2
3
4
5
6
7
0
:ATC:SCE:DYN:2:UAT:GPSLAT 2\r
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:} <intruder
no>{:UAT}{:GPSLONG}SP<numeric>CR
This command sets the longitudinal axis GPS antenna offset of the specified intruder. The
<intruder no> specifies the number of the intruder in the channel grouping specified.
0 to 31 (decimal ASCII)
Value
0
1
2
3
4 to 31
0
:ATC:SCE:DYN:2:UAT:GPSLONG 3\r
{:ATC |:ATC5000NG}{:SCE |:SCENARIO{:STAT: |:STATIC: |:DYN: |:DYNAMIC:} <intruder
no>{:MSO}SP<numeric>CR
This command sets the MSO of the specified intruder. The <intruder no> specifies the number of
the intruder in the channel grouping specified.
0 to 3951 (decimal ASCII)
:ATC:SCE:DYN:2:MSO 22\r
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Meaning
No Data
2 meters Left
4 meters Left
6 meters Left
0 meters
2 meters Right
4 meters Right
6 meters Right
Meaning
No Data
Applied by sensor
2 meters
4 meters
6 to 60 meters
Operation, Remote Operation
Scenario Commands
1-2-5
Page 87