Page 2 ▪ Software and Firmware Upgrades ▪ Wiring Tools ▪ USB Firmware Upgrades ▪ Port Discovery ▪ StrataSync Firmware Upgrade ▪ Hub Flash ▪ Firmware Recovery ▪ Ping Tool viavisolutions.com viavisolutions.com © 2020 VIAVI Solutions Inc. © 2020 VIAVI Solutions Inc.
Page 3 ▪ HL Leakage Option and Transmitter ▪ Return Sweepless Sweep ▪ Ingress Scan ▪ Sweep Errors ▪ Channel Check ▪ DOCSIS Check ▪ One CHECK ▪ CATV Measurements viavisolutions.com viavisolutions.com © 2020 VIAVI Solutions Inc. © 2020 VIAVI Solutions Inc.
Page 4 Will assist you in using/configuring products or address calibration, Return Material Authorization (RMA) request, issues regarding product performance. services quotation, order status. T : +1-844 GO VIAVI (+1-844-468-4284) T : 1-844 GO VIAVI (+1-844-468-4284) E: catvsupport@viavisolutions.com E: NAM.CustomerCare@viavisolutions.com For access to online technical and product support: https://www.viavisolutions.com/en-us/services-and-...
Page 5 OneExpert CATV Overview viavisolutions.com viavisolutions.com © 2020 VIAVI Solutions Inc. © 2020 VIAVI Solutions Inc.
Page 6 MP60/80A USB Power Meter ▪ CATV Measurements ▪ Quick Check ▪ Spectrum ▪ ▪ HL Leakage Option and Transmitter ▪ Ingress Scan ▪ Channel Check ▪ DOCSIS Check ▪ One CHECK viavisolutions.com viavisolutions.com © 2020 VIAVI Solutions Inc. © 2020 VIAVI Solutions Inc.
Page 7 Will assist you in using/configuring products or address calibration, Return Material Authorization (RMA) request, issues regarding product performance. services quotation, order status. T : +1-844 GO VIAVI (+1-844-468-4284) T : 1-844 GO VIAVI (+1-844-468-4284) E: catvsupport@viavisolutions.com E: NAM.CustomerCare@viavisolutions.com For access to online technical and product support: https://www.viavisolutions.com/en-us/services-and-...
Page 8 OneExpert CATV Overview viavisolutions.com viavisolutions.com © 2020 VIAVI Solutions Inc. © 2020 VIAVI Solutions Inc.
Page 9 Port 2 – RF Port 1 – RF OneExpert CATV Interfaces Ingress Port US/DS Analysis Upstream DOCSIS, QAM Ingress and D-Ring Dual 10/100/1000 RJ45 Ports Dual USB 2.0 Ports D-Ring Battery Charger – Under Flap viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 10 (for example, an incorrect charger is attached) ▪ SOLID RED indicates that the charging was BACK, HOME and UTILITY suspended due to overheating Buttons ▪ SOLID AMBER indicates that the battery is charging POWER O/I Button viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 11 Battery Replacement viavisolutions.com viavisolutions.com © 2020 VIAVI Solutions Inc. © 2020 VIAVI Solutions Inc.
Page 12 Removing and Replacing Battery Remove OneExpert CATV cloth case and locate the 6 flat-head screws marked with the battery icon Loosen each screw with a standard slotted screwdriver until they disengage from the MAINFRAME portion of the unit Note that these 6 screws are designed to remain captive with the MODULE.
Page 14 RF Barrel and Collar Replacement viavisolutions.com viavisolutions.com © 2020 VIAVI Solutions Inc. © 2020 VIAVI Solutions Inc.
Page 15 OneExpert CATV RF Ports F-81 Adapter Barrel Style Connector The ONX-CATV has two RF ports with field replaceable barrel style connectors. The ONX ships with two F- 81 splice style adapters rated to 3 GHz. These F-81 adapters are 1.2 in (307mm) long with a 0.5 in (132mm) distance between either end and...
Page 16 The reinforcing strength provided by the collar requires the collar to be firmly held in place by the F-81 barrel-connector inserted into the ONX’s RF ports. A loose collar will not properly strengthen the F-81 barrel-connector, making it more susceptible to breaking when stressed. viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 17 WARNING: Do NOT overtighten the F-81 adapter into the ONX’s RF port, this can lead to permanently broken RF ports. Also, it is not recommended to use power tools when removing or replacing the F-81 adapters. viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 21 Engineering Mode Hold UTILITY KEY simultaneously during POWER button press. Continue to hold UTILITY KEY until LEDs flash ORANGE, then release UTILITY KEY viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 23 Home Screen HOME is the default screen when OneExpert CATV is powered on ▪ It can be reached by selecting the HOME screen button above the On/Off Button ▪ Back Button from any test also returns the user to the HOME screen viavisolutions.com...
Page 24 TEST FUNCTION ICONS can also be rearranged like a mobile device Each MENU option is labeled and can be opened or collapsed by the triangle buttons to the right viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 26 VOLUME – Control the device volume HELP – Provides TAC phone numbers TUTORIAL – Future enhancement to delivery video tutorials to the OneExpert CATV WORKFLOW MANAGER - Future enhancement TEMPLATES – Use to switch between multiple templates and configurations viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 27 Utility Menu – Screenshot Creation Select SCREENSHOT from the UTILITY menu, a prompt to save the screenshot will appear A long push on UTILITY menu key will also automatically start a screen capture viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 29 Navigate from the HOME Screen down to the bottom, using the D PAD or swiping with a finger Select SYSTEM SETTINGS From SYSTEM SETTINGS, the user can set up the meter a variety of ways viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 30 Date and Time Select DATE AND TIME and make sure that TIME SYNCHRONIZATION is set to STRATASYNC This is important because test data will be time stamped viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 31 Select SCREEN AND POWER MANAGEMENT to better conserve the ONX battery life Recommended values are shown to the right. However, if POWER OFF DELAY needs to be set higher in order to accommodate technician’s pace, select appropriate time viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 32 Customizing the Home Screen Select HOME SCREEN to customize which measurement bundles are available on the HOME screen of the OneExpert CATV Technicians are invited to customize as needed viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 33 Hardware and Software Revisions Select HARDWARE & SOFTWARE REVISIONS to verify the most up to date FIRMWARE is installed Additionally, OneExpert CATV Serial Number (listed as Unit ID) and CM MAC Addresses (used in provisioning of the onboard Cable Modem) viavisolutions.com...
Page 35 CATV Settings Navigate from the HOME screen to CATV SETTINGS ▪ IPv4 or IPv6 ▪ Tilt ▪ Sweep ▪ Diplex ▪ Digital Measurement ▪ Channel Plan Build Settings viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 40 Software and Firmware Updates viavisolutions.com viavisolutions.com © 2020 VIAVI Solutions Inc. © 2020 VIAVI Solutions Inc.
Page 41 Software and Firmware Upgrades Software (SW) and Firmware (FW) releases are the best way to ensure your VIAVI OneExpert is ▪ functioning at its best ▪ VIAVI delivers SW and FW easily via StrataSync and USB Stick All OneExpert units should be upgraded to the latest production software release – available through ▪...
Page 42 ONXCBL.xxx.xxx.xxx.oxu to the root directory of a USB thumb drive. ▪ Press Cancel once the download has completed and you have placed the file on the USB thumb drive. Note: Firmware must be downloaded from StrataSync first viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 45 Plug the USB drive with the “.oxu” firmware file into one of the ONX USB ports. Hold down the left softkey+ right softkey+ up arrow. (softkeys are the 4 buttons just below the display) Press and release power key as normal while continuing to hold viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 46 StrataSync Synchronization viavisolutions.com viavisolutions.com © 2020 VIAVI Solutions Inc. © 2020 VIAVI Solutions Inc.
Page 47 Note - You can synchronize to StrataSync via RF or WiFi, but this is ONLY for sending test files, receiving configuration information like limit plans, etc. - not for SW/FW upgrades Connect an Ethernet cable from an active internet connection (Cable Modem or router/gateway) to Port 1 on the ONX viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 48 WiFi, but this is ONLY for sending test files, receiving configuration information like limit plans, etc. From the ONX home screen navigate to SYSTEM Connect with WiFi from an active internet connection NETWORK / WIFI - Verify the ONX has a valid IP (Cable Modem or router/gateway) address viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 49 StrataSync Synchronization - RF Make sure that CM MAC 1 is provisioned in the billing system Once CONNECTION STATUS reports a GREN Check mark and Select the CONNECTION APP from CATV INTERFACE: RF; IP ADDRESS is shown viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 50 StrataSync Synchronization – ETHERNET, WIFI and RF STRATASYNC ACCOUNT ID = xxxxxxxxx After IP Address verification, navigate to SERVER ADDRESS = stratasync.jdsu.com the SYSTEM Menu and select (stratasync.viavisolutions.com also works) STRATASYNC SERVER PORT = 443 viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 52 MOBILE TECH APP Search for VIAVI and download VIAVI MOBILE TECH v3.1 app * Screenshots shown on iPhone, but MOBILE TECH APP on ANDROID is consistent viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 53 MOBILE TECH APP – Set Up On ONX620 or 630, enable BLUETOOTH by going to SYSTEM SETTINGS->BLUETOOTH SETTINGS or by dragging down the TRAY and selecting BLUETOOTH and making sure it illuminates in GREEN viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 54 MOBILE TECH APP – Set Up Select the appropriate OneExpert CATV serial number from the list of BLUETOOTH CONNECTIONS and pair OneExpert CATV will flash a pairing request message, select YES viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 55 MOBILE TECH APP – Set Up Login using USERNAME and PASSWORD If user doesn’t have login credentials – please reach out to local STRATASYNC ADMINISTRATOR viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 56 Whether the SYNC will require WIFI or may use the LTE connection ▫ Whether or not to send usage reports ▫ Comprehensive SYNC (useful for uploading failure logs) ▫ Clear local Storage on user phone viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 57 By selecting SYNC – the process will begin immediately • The user can also rely on the timed sync setting – which allows the MOBILE TECH APP the ability to sync passively in the background are regular intervals viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 58 Remote Display and Operation • IN-APP Support Documentation • LINK to VIAVI Technical Support Note – MOBILE TECH APP is interoperable with • TB2000, TB4000, TB5800, One EXPERT CATV and a host of other VIAVI Solutions instruments viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 59 MOBILE TECH APP - Remote Display REMOTE DISPLAY allows the user to control the ONX, via BLUETOOTH, and conduct normal meter functions *Requires SmartAccess Anywhere option viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 60 MOBILE TECH APP - LOCAL FILES Allows users the ability to take photos or use photos from their mobile device and upload to StrataSync viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 63 Ethernet – Tests and Settings From HOME screen, select ETHERNET Once NETWORK UP is indicated with green, select TEST AND SETTINGS viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 64 • CATV Ethernet’s throughput IP Address/URL is configured in the mode under Settings. Ethernet – Speed Check • Default value are for both Downstream/Upstream the same: http://CATVSpeedTest.viavisolutions.com/bigfile.zip • If the upstream URL changes, the file name need to be the same: bigfile.zip viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 65 Stop Test and choose Server Settings on the bottom and enter the Server IP address and then resume. (Only applicable for first test setup) Fallback Server is for second TrueSpeed VNF and can help alleviate queue viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 66 ETHERNET - TrueSpeed Results After test completes, Results are displayed as either the Speedometer or a simple list viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 68 ELECTRICAL ETHERNET port under test Useful in determining if a customer’s switch or router can handle higher speed ethernet services Port 1 or Port 2 can conduct this test viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 69 Additional characteristics can be set to identify ports exhibiting the correct throughput, Duplex config or type viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 82 HOME TDR A TDR measures reflections based on time. Therefore the correct Velocity of Propagation for the cable to be tested must be chosen first. VoP is essential for accurate distance measurements viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 83 Displayed is a 57’ cable with a splice. The splice is a small reflection at 22’ Splice while the open end of the cable is a larger reflection at 57’. viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 84 HOME TDR displays all 4 events. Markers can be added for relative distances under from the display button. Horizontal Zoom and Pan functions are at the bottom of the display Splice Splitter Open Open viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 85 HL Leakage with Transmitter viavisolutions.com viavisolutions.com © 2020 VIAVI Solutions Inc. © 2020 VIAVI Solutions Inc.
Page 86 Required Equipment Includes: ▪ ONX-620 or ONX-630 with DOCSIS 3.1 hardware ▪ HL Leakage software option must be present on the OneExpert CATV ▪ HL Leakage Transmitter (60dBmv output [RED LIGHT] and 40dBmv output [GREEN LIGHT]) ▪ HL Leakage Antennas Connect to ▪...
Page 87 MUTE or UNMUTE and VOLUME controls as well as PAUSE and STOP/RETEST will be displayed across the bottom Since HL Leakage is LIVE, select STOP before adjusting the SQUELCH limit viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 104 One Check One Check without HL Leakage Requirement (Default) One Check with HL Leakage Requirement viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 105 One Check User can verify that configurations are correct and up to date by selecting VIEW STRASYNC CONFIGURATION viavisolutions.com © 2020 VIAVI Solutions Inc.
Page 118 CATV Network Configurations viavisolutions.com © 2020 VIAVI Solutions Inc. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 119 Sweepless Sweep (Downstream) ▫ Ingress Expert ▫ Return Signal Generator w/ Loopback ▫ Quick Check Expert ▫ OneCheck Expert ▫ Field View (with Return Signal Generator) ▫ Reverse Sweepless (Upstream) © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 120 Quick Check Expert viavisolutions.com © 2020 VIAVI Solutions Inc. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 121 To populate the FULL SCAN, user must first save a channel plan in ChannelCheck before loading it in QuickCheck Expert To populate the QuickCheck mode with channels, user must add them manually © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 122 CHANNELCHECK SETUP Select SAVE CHANNEL PLAN. A message will display indicating the Channel Plan has ben saved. The Channel plan will be named after the WORK ORDER ID © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 123 EXPERT under CATV NETWORK Test will automatically run, STOP test and change APP MODE to FULL SCAN Select CONFIGURE and select CHANNEL PLAN Select the appropriate saved CHANNEL PLAN © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 124 Quick Check Expert – Full Scan Mode © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 125 Quick Check Expert – Quick Check Mode © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 126 Channel Expert viavisolutions.com © 2020 VIAVI Solutions Inc. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 127 Measures Echo, GD, ICFR (This is an Adaptive Equalizer Test) ▪ Hum (Less than 1000 kHz ) ▪ DQI ( Digital Quality Index) ▪ Ingress Under Carrier ▪ ADJ Channel Delta © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 129 CONFIGURE button when the STOP function is pressed ▪ All new test functions are LIVE tests so to access CONFIGURE, test must be stopped first © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 130 Channel Expert Configure Test point © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 132 Channel Expert Configure Save Test © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 133 Configure – View Test – Delta Tab © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 136 Channel Expert QAM Test Point Compensation Open/close window Select Channel Reference Press star to turn to gold color for marking as favorite channel Slide left or right to change channel © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 137 Highest tap stress level of reflection Highest delay of a group of signals In Channel Peak to Valley measurement of a QAM carrier Colors represent the Limit set value Warning Pass Fail limit © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 138 RF signal is performing Automatic Gain Control level of the channel is not consistent and is varying in amplitude in milliseconds Colors represent the Limit set value Warning Pass Fail limit © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 139 9 Channel Spectrum view of Ingress under the carrier Typical ingress Measures the Level of selected channel in a 5-minute window Measures the MER of selected channel in a 5- minute window © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 140 5-minute window BER Drop Measures the DQI of selected channel in a 5- minute window variation Measures the In-channel frequency response level of a QAM carrier Low end roll © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 141 Smart scan removes the over all tilt to show typical deviation in a graph MER shows the value of all the QAM channels in the system in a bar graph © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 142 Up to 15 favorite channel can Channel Expert QAM be selected by pressing the white star in the channel view and turning it gold See the Constellation of the selected channel © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 143 Frequency Response Adaptive equalizer Average MER of all worst case stress tap the QAM carriers. Level and MER of 4 MER Std Deviation adjacent SC-QAM MER a 2% and OFDM © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 144 Channel Expert OFDM IUC Ingress under carrier ingress Level of OFDM carries measures at 6 MHz spacing © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 145 Channel Expert OFDM MER graph of OFDM ingress Double Tap to see details Can use marker to see exact frequencies of carriers and MER values © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 146 Helps determine how well the network is performing at this location In channel Frequency Response across a OFDM band can help determine if a refection or roll off is occurring © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 147 DOCSIS Expert viavisolutions.com © 2020 VIAVI Solutions Inc. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 152 DOCSIS Expert Double Tap to change BW © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 154 Return Signal Generator (RSG) w/ Loopback viavisolutions.com © 2020 VIAVI Solutions Inc. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 155 Getting Started with RSG Loopback ▪ RFG Loopback mode will appear in the CATV Network section on the ONX home screen ▪ To enter the mode press, or select, the RFG Loopback icon © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 158 Field View with RSG viavisolutions.com © 2020 VIAVI Solutions Inc. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 159 ▪ Meter spectrum mode enables tech to test upstream spectrum only at their local test point © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 160 If enabled on the ONX, Field View mode will appear in the CATV Network section on the ONX home screen ▪ To enter the mode press, or select, the Field View icon © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 161 Left: Noise visible between the active upstream carriers CMTS and leads to a better quality of Right: Noise source cleaned up reveals a much lower system experience for subscribers noise floor © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 162 The telemetry receive frequency is entered on the ONX by pressing the Configure button then selecting “Configure Telemetry” ▪ This will bring up an entry box where the telemetry frequency can be entered © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 163 • Users can select the desired node from the list of actively broadcasting nodes from the PathTrak system • Users can also get details of the specific broadcasting nodes © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 164 FieldView RSG Transmit Carriers © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 165 Field View RSG Transmit Carriers Carriers © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 167 OneCheck Expert viavisolutions.com © 2020 VIAVI Solutions Inc. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 168 Getting Started with OneCheck Expert OneCheck Expert mode will appear in the CATV Network section on the ONX home screen To enter the mode press, or select, the Field View icon © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 174 Ingress Expert viavisolutions.com © 2020 VIAVI Solutions Inc. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 176 DSAM6300 INGRESS EXPERT is different from Swept Spectrum Analyzers (DSAM and Pathtrak) – its more accurate and has thousands of samples a second Overlapping options provide additional detail ONX630 © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 178 INGRESS EXPERT – HEATMAP OVERLAYS © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 179 60dB dynamic OVERRANGE range • • NOTE: The spectrum NOTE: The Specification is 120 Attenuation scale is disabled when AGC is checked © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 181 EXPERT, UCDs will match that of the network and give clear indication of the carriers width and location ▪ Additionally, UCDs will be demodulated with FREQUENCY, LEVEL and SNR calculated and displayed © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 182 Sweep & Plant Maintenance System ONX-630 & SCU-1800...
Page 183 SCU-1800 viavisolutions.com © 2020 VIAVI Solutions Inc. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 184 • advanced parallel Common sweep reporting instantly identifies the processing find hidden for ONX-630 and DSAM channel lineup and problems and root ensures consistency via eliminates guesswork causes StrataSync™ © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 185 Sixteen switchable return sweep ports (sw optional) ▪ Flexible mode of operation ONX-630 ▪ Forward Tx only (5500) ▪ Forward + Single User Reverse (5500) ▪ Multi-User Reverse (5510) © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 186 The sweep is remotely configurable via Ethernet and browser, and a sweep plan can be built from imported information from the OneExpert ONX • Additionally, there is an auto-fill capability in which the sweep points are automatically injected in unoccupied spectrum areas. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 187 ▪ Up to 500 sweep points ▪ Optional Auto input select ▪ Future proof with 1800 MHz capable Frequency Range hardware ▪ 5 to 204 MHz ▪ SDA Protocol ▪ SDA Protocol © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 188 Typical SCU-1800 Connection diagram © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 189 SCU-1800 DSAM • ONX coupled with new Sweep Control unit can provide sweep to 1.2GHz and beyond • DSAM units on same system are still compatible up to 1GHz. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 190 860MHz 1000MHz Upstream Downstream (DS) DOCSIS 3.0 Diplex 204MHz 4MHz 258MHz 1218MHz Diplex Upstream Downstream DOCSIS 3.1 D3.1 OFDM Carrier D3.1 OFDM Carrier D3.1 OFDM-A Carrier D3.1 OFDM-A Carrier © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 191 HTTP interface to Sweep Control Unit provides remote connection to easily manage configurations remotely Configure Sweep Locally from a laptop HTTP interface to Sweep Control Unit provides easy access to configurations locally © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 192 Improved noise floor ✓ Saves costs ✓ Reduced rack space … ✓ Rev Sweep Consolidation of sweep receivers Optical Receiver NODE Optical Receiver NODE Optical Receiver NODE DSAM OneExpert OneExpert © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 193 Spectral Purity: 50 dBc harmonics and spurious; Reverse Sweep points injection: +20 to+50 recommend 1 MHz space from SC QAM edge dBmV • Reverse Telemetry Level: +20 to+50 dBmV © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 201 Export and Import Reverse Channel Plan © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 202 Forward Sweep viavisolutions.com © 2020 VIAVI Solutions Inc. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 206 Forward Sweep Point Clear Reference © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 207 Forward Sweep Point Save Reference © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 210 Forward Sweep Screens Absolute “Raw” Referenced Alignment © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 211 Return Sweep viavisolutions.com © 2020 VIAVI Solutions Inc. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 213 Reverse Sweep Configure Test Point © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 214 Reverse Sweep Configure Test Point Injection © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 216 Reverse Sweep Clear Or Choose Reference © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 219 Reverse Sweep Screens Absolute “Raw” Referenced Alignment © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 220 Sweepless Sweep viavisolutions.com © 2020 VIAVI Solutions Inc. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 223 Sweepless Sweep Clear Reference © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 224 Sweepless Sweep Save File or Reference © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 227 Sweepless Sweep Absolute and Referenced © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 228 Sweepless Return Sweep viavisolutions.com © 2020 VIAVI Solutions Inc. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 229 Reverse Sweepless Sweep Configure and Test Point © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 230 Reverse Sweepless Service plan Select © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 231 Reverse Sweepless Sweep Reference © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 233 Reverse Sweepless Sweep Absolute and Referenced © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 234 Typical Reverse Sweep Errors viavisolutions.com © 2020 VIAVI Solutions Inc. © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 236 •#3. RF channel power into the ONX exceeds 20 dBmV. Check the High Power Environment in the Test Point template Figure 4: Figure 5: High Power setting High Power setting © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 237 SCU-1800 to decode or not present at the SCU-1800 • Return Telemetry > 30 dB to the input of the SCU- 1800 • Too much return RF power into the SCU-1800 © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 238 SDA 5500 return sweep is on • Too much return RF power. Verify out put on ONX is not too high. • Please Review SCU-1800 Getting Started Guide © 2017 Viavi Solutions, Inc. | Viavi Confidential and Proprietary Information...
Page 239 viavisolutions.com...

Viavi OneExpert CATV Extended Quick Start Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Viavi OneExpert CATV

Summary of Contents for Viavi OneExpert CATV

Table of Contents