Viavi ATC-5000NG Operation Manual page 373

SDX Command
:DATALINK:MESSage:TABLE?
:DATALINK:MESSage:TABLE:TYPE
:DATALINK:MESSage:TABLE:STATE
:DATALINK:MESSage:TABLE:DATA
:DATALINK:MESSage:TABLE:ADDRess
:DATALINK:MESSage:TABLE:STYLE
:DATALINK:MESSage:COPY
:DATALINK:DELAY:INITial
:DATALINK:DELAY:SEGMENT
:DATALINK:DELAY:CLOSEout
:DATALINK:DELAY:MESSage
:DATALINK:DELAY?
:DATALINK:GLOADDR
Pulse Commands
:PULSE:VARiable
:PULSE:VAR:AMPlitude
:PULSE:VAR:POSition
:PULSE:VAR:WIDth
:PULSE:VAR?
:PULSE:INTERFerence:AMPlitude
:PULSE:INTERFerence:WIDth
:PULSE:INTERFernece:POSition
:PULSE:INTERFernece:SPACing
:PULSE:INTERFernece:STATE
:PULSE:INTERFerence?
:PULSE:SLS:AMPlitude
:PULSE:SLS:POSition
:PULSE:SLS:WIDth
Rev. L0
February 2020
Supported / Not Supported Comments
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Supported Use short form of the command.
Supported Use short form of the command.
Supported Use short form of the command.
Supported Use short form of the command.
Supported Use short form of the command.
Supported
Supported
Supported
Supported Not working at this time.
Supported
Supported Formatting Differences
The SDX returns the offset from the default width.
The ATC-5000NG returns the total pulse width.
Supported
Supported
Supported
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Appendix D - ATC-5000NG Compatibility Command Set
ATC-5000NG Equivalent (or Similar)
None
None
None
None
None
None
None
None
None
None
None
None
None
:ATC5000:XPDR:PULSE
:ATC5000:XPDR:PULSE
:ATC5000:XPDR:PULSE
:ATC5000:XPDR:PULSE
None
:ATC5000:XPDR:INTERFERENCE:AMPLITUDE
:ATC5000:XPDR:INTERFERENCE:{P1WIDTH | P2WIDTH}
:ATC5000:XPDR:INTERFERENCE:POSITION
:ATC5000:XPDR:INTERFERENCE:SPACING
:ATC5000:XPDR:INTERFERENCE:STATE
None
:ATC5000:XPDR:PULSE
:ATC5000:XPDR:PULSE
:ATC5000:XPDR:PULSE
Appendix - D
Page 4