Thermal kɖticăů bi-spectrum network camera (89 pages)
Summary of Contents for HIKVISION DS-2TD6567T-50H4LX/W
Page 1
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual...
Page 2
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
Page 3
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.
Page 4
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, Caution could result in equipment damage, data loss, performance...
Page 5
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Laws and Regulations ● In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
Page 6
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual ● Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). ● DO NOT dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.
Page 7
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual ● DO NOT aim the lens at the sun or any other bright light. ● The equipment shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the equipment.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Contents Chapter 1 Overview........................1 1.1 Brief Description ........................1 1.2 Function ..........................1 Chapter 2 Device Activation and Accessing ................. 2 2.1 Activate the Device via SADP ....................2 2.2 Activate the Device via Browser ................... 2 2.3 Login ............................
Page 9
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 5.2 Set VCA Parameters ......................23 5.3 Configure the Behavior Analysis ..................23 5.3.1 Set Detection Scenes and Tracking ................23 5.3.2 Set Rules ........................24 5.3.3 Set the Scene Auto-Switch ..................26 5.4 Advanced Configuration......................
Page 10
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 8.2.3 Send Email ........................ 42 8.2.4 Notify Surveillance Center ..................43 8.2.5 Trigger Recording ..................... 43 Chapter 9 PTZ ........................... 44 9.1 PTZ Control .......................... 44 9.2 Set Preset ..........................46 9.2.1 Special Presets ......................
Page 11
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 10.1.8 Light ........................58 10.1.9 Operate Wiper ......................58 10.1.10 Lens Initialization ....................59 10.1.11 Track Manually ..................... 59 10.1.12 Auxiliary Focus...................... 59 10.1.13 Quick Set Live View ....................59 10.1.14 Lens Parameters Adjustment ................60 10.1.15 Conduct 3D Positioning ..................
Page 13
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 12.1.1 Set Memory Card ....................79 12.1.2 Set NAS ........................79 12.1.3 Set FTP ........................80 12.1.4 Set Cloud Storage ....................80 12.2 Video Recording ........................ 81 12.2.1 Record Automatically ..................... 81 12.2.2 Record Manually ....................
Page 14
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 14 System and Security ....................95 14.1 View Device Information ....................95 14.2 Search and Manage Log ....................95 14.3 Import and Export Configuration File ................95 14.4 Export Diagnose Information .................... 96 14.5 Reboot ..........................
Page 15
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 15 Appendix ......................108 15.1 Common Material Emissivity Reference ................ 108 15.2 Device Command......................108 15.3 Device Communication Matrix ..................109...
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 1 Overview 1.1 Brief Description Thermal & Optical Bi-spectrum PTZ network camera, integrates the function of the decoder, thermal camera, and the high-definition zoom camera. It performs temperature measurement, dynamic fire source detection and other smart detections in the remote surveillance of the power system, metallurgy system, and petrochemical engineering, and so on.
2.1 Activate the Device via SADP Search and activate the online devices via SADP software. Before You Start Access www.hikvision.com to get SADP software to install. Steps 1. Connect the device to network using the network cable. 2. Run SADP software to search the online devices.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Note The default IP address of the device is 192.168.1.64. You can set the IP address of the PC from 192.168.1.2 to 192.168.1.253 (except 192.168.1.64). For example, you can set the IP address of the PC to 192.168.1.100.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Operating System Web Browser Operation plug-in installation is not required. Display and operation of certain functions are restricted. For example, Playback and Picture are not available. For detailed restricted function, refer to the actual device.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 3 Temperature Measurement When you enable this function, the device measures the actual temperature of the scene. It alarms when temperature exceeds the temperature threshold value. 3.1 Notice This part introduces the notices of configuring temperature measurement function. ●...
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 3.2 Thermography Configuration Flow Chart This part introduces the process of configuring temperature measurement. Figure 3-1 Thermography Configuration Flow Chart...
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Note Please refer to the Quick Start Guide for detailed information of Installation part in the flow chart. 3.3 Automatic Thermography Configure the temperature measurement parameters and temperature measurement rules. The device can measure the actual temperature and output alarms when temperature exceeds the alarm threshold value.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Add Original Data on Stream Check to add original data on thermal view. Data Refresh Interval It means the refresh interval of temperature information. Unit Display temperature with Degree Celsius (°C)/Degree Fahrenheit (°F)/Degree Kelvin (K). Temperature Range Select the temperature measurement range.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Distance The distance between the target and the device. Pre-Alarm Threshold When the temperature of target exceeds the pre-alarm threshold, and this status keeps NOT shorter than Filtering Time, it triggers the pre-alarm. Alarm Threshold When the temperature of target exceeds the alarm threshold, and this status keeps NOT shorter than the Filtering Time, it triggers the alarm.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Note Go to Image → VCA Rules Display to adjust the font size and the temperature color of normal, alarm and pre-alarm. 9. Optional: Call the preset and check if the rules are efficient. 10.
Page 26
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Set the tolerance temperature to prevent the constant temperature change to affect the alarm. E.g., set tolerance temperature as 3°C, set alarm temperature as 55°C, and set pre- alarm temperature as 50°C. The device sends pre-alarm when its temperature reaches 50°C and it alarms when its temperature reaches 55°C and only when the device temperature is lower than 52°C will the alarm be cancelled.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 3. Drag the corners of the area to adjust the size and shape. Go to Live View interface to view the maximum temperature and rule of the area in thermal channel. 3.4 Manual Thermography After enable the manual thermography function of the device, you can click any position on the live view to show the real temperature.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 4 Fire and Smoke Detection The device will trigger and upload alarm when detect the fire source or smoke. Fire and smoke detection is applied to fire-prevention purposes in scenic region, forest, tunnel and so on.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 4.1 Fire and Smoke Detection Flow Chart Introduce the process of configuring fire and smoke detection. Figure 4-1 Fire and Smoke Detection Flow Chart Note Please refer to the Quick Start Guide for detail information of Installation part in the flow chart. Obtain the information of longitude, altitude, direction and so on by device after installation.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual appropriate scene. Fire source detection can be applied to indoor and outdoor monitoring with a maximum detection radius 15 km. To achieve the best monitoring effect, please set the installation place as requirements below.
Page 31
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Figure 4-2 Set the Presets for fire detection 2. Divide the scan area into three parts and set a preset every 120°. The black numbers are presets, and the red numbers are scan areas. 3.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 5 km 7 3 to 5 km 4.5 Set Fire Detection Parameters To avoid the potential fire damage, you should configure the fire detection function for certain areas. The detail configuration steps show as below. Before You Start ●...
Page 33
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual The system stops to check the doubtful fire source after first detection. It alarms with high accuracy after double checking the fire source on multiple frames, thus the detection speed is slow. As to the detection sensitivity of this mode, adjust the Sensitivity during Patrol for the first detection and Verification Sensitivity for the double check.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 6. Optional: you can shield certain areas from being detected in fire source detection. Refer to Set Fire Source Shielded Region for details. 7. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Note ● Set vertexes clockwise or anticlockwise in sequence. ● The pan angle of set area should be from 2 to 80 degrees, and tilt angle should be from 1 to 45 degrees.
Page 36
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 6) Click Clear All to clear all of the setting areas. 7) Set the value of Active Zoom Ratio on your demand, and then the shield will only appear when the zoom ratio is greater than the predefined value 8) Click Add to save the smoke detection shield, and it will be listed in the Smoke Detection Shield List area.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 5 Behavior Analysis The behavior analysis function is used to detect whether there is any target break the VCA rules. The optical camera will track the target or the device will alarm when the VCA rule is triggered. 5.1 Flow Chart of Behavior Analysis The process of configuring the behavior analysis function is described below.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 5.2 Set VCA Parameters Steps 1. Go to Configuration → Local. Rules Enable it to display rules information on live view. Display Rules Info. on Capture Select Yes to display rules information on the capture. 2.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual tracking parameters for better target monitoring performance. Steps 1. Go to Configuration → VCA, and select a camera channel. 2. Click Scene Configuration and New Scene to create one or more scenes. 3.
Page 40
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Line Crossing If any target move across the setting line, the alarm will be triggered. You can set the crossing direction. Intrusion If any target intrude into the pre-defined region longer than the set duration, the alarm will be triggered.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Note ● You can draw the max. size and min. size rectangles according to the real target in the scene. The recommended size is 1.2 times of the target. ● The height of the rectangle is a more important factor as it is the main difference to tell apart a human and an animal.
Page 42
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Minimum Target Size The system will filter out the object smaller than the minimum target size. Displacement Constraint for Target Generation The higher the value is, the slower the target is generated, and the higher accuracy the analysis will get.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 6 Ship Detection In this function, you can set parameters and alarm rules for ship flow detection, dredger detection, and fishing ship detection. The camera will detect the target according to the settings, and will alarm when the target breaks the set rules.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 6.2.1 Set a Detection Scene Multiple detection scenes are supported for both channels. You can create scenes and set the tracking parameters for better target monitoring performance. The settings may vary according to different camera models.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 2. Select Ship Flow Detection from the drop-down list. 3. Check Region Entrance/Exiting Alarm. 4. Draw an area. 1) Click and drag the mouse in the live video window to draw the area. You can drag the corners of the rectangle area to draw a polygon area.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 9. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method. 6.2.4 Set Fishing Ship Detection After enabling this function, the device will detect fishing ships and trigger an alarm according to the alarm settings.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 6.3 Set Scene Auto-Switch The device supports patrol among the scenes and performs the set detection. Patrol sequence and dwelling time in each scene are configurable. Before You Start Finish scene settings in advance. See Set a Detection Scene for configuration instructions. Steps 1.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 7 Event and Alarm This part introduces the configuration of events. The device takes certain response to triggered alarm. Certain events may not be supported by certain device models. 7.1 Set Motion Detection It helps to detect the moving objects in the detection region and trigger the linkage actions.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Figure 7-1 Set Rules Stop Drawing Stop drawing one area. Clear All Clear all the areas. 4. Optional: You can set the parameters of multiple areas by repeating the above steps. 7.1.2 Expert Mode You can configure the motion detection parameters of day/night switch according to the actual needs.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual The higher the value of sensitivity is, the more sensitive the motion detection is. If the sensitivity is set to 0, motion detection and dynamic analysis do not take effect. 3. Select an Area and click Draw Area. Click and drag the mouse on the live video, then release the mouse to finish drawing one area.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Figure 7-3 Set Video Tampering Area 6. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method. 7. Click Save. 7.3 Set Alarm Input Alarm signal from the external device triggers the corresponding actions of the current device.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 3. Select Alarm Input NO. and Alarm Type from the dropdown list. Edit the Alarm Name. 4. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 7.6 Detect Audio Exception Audio exception detection function detects the abnormal sound in the surveillance scene, such as the sudden increase/decrease of the sound intensity, and some certain actions can be taken as response.
Page 54
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Display Gas Info. on Stream Check to add leakage gas information on stream, and the overlay will be displayed in live view. Sensitivity The higher the value is, the easier the leakage gas can be detected. Alarm Concentration When the leakage gas concentration exceeds the set concentration value, an alarm will be triggered.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 8 Arming Schedule and Alarm Linkage Arming schedule is a customized time period in which the device performs certain tasks. Alarm linkage is the response to the detected certain incident or target during the scheduled time. 8.1 Set Arming Schedule Set the valid time of the device tasks.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Manual Alarm You can trigger an alarm output manually. Steps 1. Set the manual alarm parameters. Alarm Output No. Select the alarm output No. according to the alarm interface connected to the external alarm device.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Refer to Set Memory Card for memory card storage configuration. 8.2.3 Send Email Check Send Email, and the device sends an email to the designated addresses with alarm information when an alarm event is detected. For email settings, refer to Set Email.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 8.2.4 Notify Surveillance Center Check Notify Surveillance Center, the alarm information is uploaded to the surveillance center when an alarm event is detected. 8.2.5 Trigger Recording Check Trigger Recording, and the device records the video about the detected alarm event. For device with more than one camera channels, you can set one or more channels to take recordings if needed.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 9 PTZ PTZ is an abbreviation for pan, tilt, and zoom. It means the movement options of the camera. 9.1 PTZ Control In live view interface, you can use the PTZ control buttons to control the device panning, tilting, and zooming.
Page 60
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual pedestrians. Choose Non-motor Vehicle when you monitor Non-motor Vehicle the non-motor vehicles. Choose Motor Vehicle when you monitor the Motor Vehicle motor vehicles. You are recommended to set it as Auto when Auto the application scene of the speed dome is complicated.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual When the image is too bright, click the button to stop down the iris. 9.2 Set Preset A preset is a predefined image position. For the defined preset, you can call the preset No. to view the position.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Preset No. Function Preset No. Function Call patrol 1 Remote reboot Call patrol 2 Call OSD menu Call patrol 3 Stop a scan Call patrol 4 Start random scan Day mode Start frame scan Night mode Start auto scan...
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Speed Set the speed of moving from one preset to another. Time It is the duration staying on one patrol point. Delete the presets in patrol. Adjust the preset order. Note A patrol can be configured with 32 presets at most, and 2 presets at least.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 9.4 Set Pattern Scan The device can move as the recorded pattern. Steps Note This function is only supported by certain models. 1. Click to show the PTZ control panel, and click 2.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 4. Check Enter Area Settings. 5. Set the left/right/up/down limits with the PTZ control panel, and click to confirm settings. 6. Optional: Click Clear to delete the saved scan area. 7. Click Save. 8.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 9.7 Set Initial Position Initial position refers to the relative initial position of the device azimuth. You can set the initial position if you need to select one point in the scene as the base point. Steps 1.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 9.9 Set Park Action You can set the device to perform an action (for example, preset or patrol) or return to a position after a period of inactivity (park time). Before You Start Set the action type first.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 4. Click Add, and set the action type, action No. and VCA type for the added action. Up to 10 actions can be added to one path. You can click ON to manually call the path and OFF to stop it. 5.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Steps 1. Go to the setting page: Configuration → PTZ → Position Settings. 2. Select a PT Mode. Manual Use a direction indicating device to determine the North at the device location, and set the North for the device.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 3. Adjust the pan position to show the live view of the north direction by controlling the left arrow and right arrow on the PTZ panel. 4. Click Set as North. 9.12.2 Set Auto Compass For the device that has built-in e-compass, the compass can automatically tell the north direction for the device.
Page 71
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual setting interval. 3. Click Save.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 10 Live View It introduces the live view parameters, function icons and transmission parameters settings. 10.1 Live View Parameters The supported functions vary depending on the model. Note For multichannel devices, select the desired channel first before live view settings. 10.1.1 Window Division ●...
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual live view among multiple channels. Click to switch live view among multiple channels. 10.1.6 Full Screen This function is used to view the image in full screen mode. Click to start full screen mode and press ESC button to exit. 10.1.7 Conduct Regional Focus You can enable the function to focus on certain area.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Note Auto mode is only available for device that supports rain-sensing auto wiper. In auto mode, the wiper works when rain drops on the window. 10.1.10 Lens Initialization Lens initialization is used on the device equipped with motorized lens. The function can reset lens when long time zoom or focus results in blurred image.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual view page. Steps 1. Click to show quick setup page. 2. Set PTZ, display settings, OSD, video/audio and VCA resource parameters. – For PTZ settings, see Lens Parameters Adjustment . – For display settings, see Display Settings. –...
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual – Hold and drag the mouse to a lower right position to frame an area on the live: the framed area is zoomed in and relocated to the center of the live image. –...
Page 77
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Play Performance Shortest Delay The device takes the real-time video image as the priority over the video fluency. Balanced The device ensures both the real-time video image and the fluency. Fluent The device takes the video fluency as the priority over teal-time.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 11 Video and Audio This part introduces the configuration of video and audio related parameters. 11.1 Video Settings This part introduces the settings of video parameters, such as, stream type, video encoding, and resolution.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual and storage. 11.1.4 Bitrate Type and Max. Bitrate Constant Bitrate It means that the stream is compressed and transmitted at a comparatively fixed bitrate. The compression speed is fast, but mosaic may occur on the image. Variable Bitrate It means that the device automatically adjust the bitrate under the set Max.
Page 80
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual can estimate the HDD consumption by its maximum average bitrate. Compared to H.264, H.264+ reduces storage by up to 50% with the same maximum bitrate in most scenes. When H.264+ is enabled, Max. Average Bitrate is configurable. The device gives a recommended max.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual compression standard. The objective of the SVC standardization has been to enable the encoding of a high-quality video bitstream that contains one or more subset bitstreams that can themselves be decoded with a complexity and reconstruction quality similar to that achieved using the existing H.264 or H.265 design with the same quantity of data as in the subset bitstream.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Note MicIn is only supported by certain models. Input Volume Adjust the volume of the audio input. Environmental Noise Filter Set it as OFF or ON. When the function is enabled, the noise in the environment can be filtered to some extent.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 2) Click and drag the mouse on the view screen to draw the fixed region. 3) Click Stop Drawing. Note Select the fixed region that needs to be adjusted and drag the mouse to adjust its position. 6.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Manual Correction Click Correct to optimize the image once. Note It is a normal phenomenon that short video freezing might occur during the process of Background Correction and Manual Correction. Thermal AGC Mode Choose the AGC mode according to different scenes to balance and improve the image quality.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual The higher the slow shutter level is, the slower the shutter speed is. It ensures full exposure in underexposure condition. 11.4.5 Focus It offers options to adjust the focus mode, focus range, and the minimum focus distance. Focus Mode Semi-auto The device focuses once after the PTZ and lens zooming.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 11.4.7 Day/Night Switch Day/Night Switch function can provide color images in the day mode and black/white images in the night mode. Switch mode is configurable. The image is always in color. Night The image is always black/white Auto...
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 8. Go to Configuration → Image → Display Settings → Image Enhancement to set the laser compensation region. 9. Adjust the level of laser compensation. Caution The laser radiation emitted from the device can cause eye injuries, burning of skin or inflammable substances.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual and Expert modes are selectable. Normal Set the DNR level to control the noise reduction degree. The higher level means stronger reduction degree. Expert Set the DNR level for both space DNR and time DNR to control the noise reduction degree. The higher level means stronger reduction degree.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 11.4.18 Set Target Enhancement You can set the color of the targets in different temperature ranges to identify the target quickly. Steps 1. Go to Configuration → Image → Display Settings. 2.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 11.4.21 Contrast Enhancement This function can improve the palettes contract between high temperature and low temperature areas, avoiding overexposure and over darkness of the image. OFF and On modes are selectable. 11.4.22 Enhance Regional Image You can select the desired area of image to improve the coding quality.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual scan lines. Select video signal standard according to the video system in your country/region. 11.4.26 Digital Zoom You can zoom in the image. The larger the zoom size is, the more blurred the image is. 11.4.27 Local Video Output If the device is equipped with video output interfaces, such as BNC, CVBS, HDMI, and SDI, you can preview the live image directly by connecting the device to a monitor screen.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 2. Select a channel to overlay picture. 3. Click Browse to select a picture, and click Upload. The picture with a red rectangle will appear in live view after successfully uploading. 4.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 11.9 VCA Rule Display Settings The VCA rule display refers to the function that you can customize the displayed overlay information of the VCA rule, which includes the font size and line and frame color. You can go to Configuration →...
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 12 Video Recording and Picture Capture This part introduces the operations of capturing video clips and snapshots, playback, and downloading captured files. 12.1 Storage Settings This part introduces the configuration of several common storage paths. 12.1.1 Set Memory Card If you choose to store the files to memory card, make sure you insert and format the memory card in advance.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual The saving path of network disk files. Mounting Type Select file system protocol according to the operation system. Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is selected.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 1. Go to Configuration → Storage → Storage Management → Cloud Storage. 2. Check Enable Cloud Storage. 3. Set basic parameters. Protocol Version The protocol version of the cloud storage server. Server IP The IP address of the cloud storage server.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Motion When motion detection is enabled and trigger recording is selected as linkage method, object movement is recorded. Alarm When alarm input is enabled and trigger recording is selected as linkage method, the video is recorded after receiving alarm signal from external alarm input device.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 3. Click Save. 4. Click in the live view interface to start recording. Click to stop recording. 12.2.3 Playback and Download Video You can search, playback and download the videos stored in the local storage or network storage. Steps 1.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 2. Set the capture type. Timing Capture a picture at the configured time interval. Event-Triggered Capture a picture when an event is triggered. 3. Set the Format, Resolution, Quality, Interval, and Capture Number. 4.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 13 Network Settings 13.1 TCP/IP TCP/IP settings must be properly configured before you operate the device over network. IPv4 and IPv6 are both supported. Both versions can be configured simultaneously without conflicting to each other.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Manual Input IPv6 Address, IPv6 Subnet, IPv6 Default Gateway. Consult the network administrator for required information. It stands for maximum transmission unit. It is the size of the largest protocol data unit that can be communicated in a single network layer transaction.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual TCP-based full-duplex communication protocol port for plug-in free preview. Certificate verification is required to ensure the secure access. Note ● WebSocket Port and WebSockets Port are only supported by certain models. ●...
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 13.3.2 Set Manual Port Mapping Steps 1. Check Enable UPnP™, and choose a friendly name for the device, or you can use the default name. 2. Select the port mapping mode to Manual, and set the external port to be the same as the internal port.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Note The SNMP version you select should be the same as that of the SNMP software. And you also need to use the different version according to the security level required. SNMP v1 is not secure and SNMP v2 requires password for access.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual the device. Steps 1. Go to Configuration → Network → Basic Settings → PPPoE. 2. Check Enable PPPoE. 3. Set the PPPoE parameters. Dynamic IP After successful dial-up, the dynamic IP address of the WAN is displayed. User Name User name for dial-up network access.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 13.8.1 Enable Hik-Connect Service on Camera Hik-Connect service should be enabled on your camera before using the service. You can enable the service through SADP software or Web browser. Enable Hik-Connect Service via Web Browser Follow the following steps to enable Hik-Connect Service via Web Browser.
1. Get and install Hik-Connect application by the following ways. Visit https://appstore.hikvision.com to download the application according to your mobile phone system.Visit the official site of our company. Then go to Support → Tools → Hikvision App Store.Scan the QR code below to download the application.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Access configuration page via web browser. 6. Tap Connect to a Network button in the popup interface. 7. Choose Wired Connection or Wireless Connection according to your camera function. Wireless Connection Input the Wi-Fi password that your mobile phone has connected to, and tap Next to start the Wi-Fi connection process.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Modify Modify the selected Open Network Video Interface user. 4. Click Save. 5. Optional: Repeat the steps above to add more Open Network Video Interface users. 13.11 Set Alarm Server The device can send alarms to destination IP address or host name through HTTP, HTTPS, or ISUP protocol.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Chapter 14 System and Security It introduces system maintenance, system settings and security management, and explains how to configure relevant parameters. 14.1 View Device Information You can view device information, such as Device No., Model, Serial No. and Firmware Version. Enter Configuration →...
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 14.4 Export Diagnose Information Diagnose information includes running log, system information, hardware information. Go to Configuration → System → Maintenance → Upgrade & Maintenance, and click Diagnose Information to export diagnose information of the device. 14.5 Reboot You can reboot the device via browser.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 2. Choose one method to upgrade. Firmware Locate the exact path of the upgrade file. Firmware Directory Locate the directory which the upgrade file belongs to. 3. Click Browse to select the upgrade file. 4.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Steps 1. Go to Configuration → System → System Settings → Time Settings. 2. Select Time Zone. 3. Click NTP. 4. Set Server Address, NTP Port and Interval. Note Server Address is NTP server IP address. 5.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual between the device and the computer or terminal when the communication distance is too long. Before You Start Connect the device and computer or terminal with RS-485 cable. Steps 1. Go to Configuration → System → System Settings → RS-485. 2.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual Note ● If the FOVs of the optical channel and thermal channel are not the same, functions such as reflect light filter and smoke auxiliary detection may be affected. ● Please adjust the visible light optical axis under professional assistance 14.15 Security You can improve system security by setting security parameters.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual and troubleshoot the security events. Steps Note This function is only supported by certain camera models. 1. Go to Configuration → System → Maintenance → Security Audit Log. 2. Select log types, Start Time, and End Time. 3.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual the visits from the certain IP addresses. IP address refers to IPv4. Steps 1. Go to Configuration → System → Security → IP Address Filter. 2. Check Enable IP Address Filter. 3.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual view, image capture, digital zoom, etc. cannot be used. If the device uses HTTP, enable WebSocket. If the device uses HTTPS, enable WebSockets. When you use WebSockets, select the Server Certificate. Note Complete certificate management before selecting server certificate.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual the priority of data sending. Note QoS needs support from network device such as router and switch. Steps 1. Go to Configuration → Network → Advanced Configuration → QoS. 2. Set Video/Audio DSCP, Alarm DSCP and Management DSCP. Note Network can identify the priority of data transmission.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 14.16 User and Account 14.16.1 Set User Account and Permission The administrator can add, modify, or delete other accounts, and grant different permission to different user levels. Caution To increase security of using the device on the network, please change the password of your account regularly.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 14.16.2 Online Users The information of users logging into the device is shown. Go to Configuration → System → User Management → Online Users to view the list of online users.
Page 123
0.98 Hard Paperboard 0.90 White Paper 0.90 Water 0.96 15.2 Device Command Scan the following QR code to get device common serial port commands. Note that the command list contains the commonly used serial port commands for Hikvision thermal cameras.
Page 124
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual 15.3 Device Communication Matrix Scan the following QR code to get device communication matrix. Note that the matrix contains all communication ports of Hikvision thermal cameras.
Need help?
Do you have a question about the DS-2TD6567T-50H4LX/W and is the answer not in the manual?
Questions and answers