Table of Contents
Advertisement
Product Manager Overview
•
Node Properties
•
Port Technology
•
Block Port
•
Enable Beaconing
•
Port Diagnostics
•
Channel Wrap (S/390 mode only)
•
Swap Ports (S/390 mode only)
•
Clear Link Incident Alert(s)
•
Reset Port
•
Port Binding
•
Clear Threshold Alert(s)
Note that these same options are also available when you click a port's graph, then
select the Port secondary menu from the Product menu on the menu bar.
For details on menu options, refer to
The bottom portion of the Performance View displays cumulative statistical
information for the port selected in the bar graph. Click the Refresh button to update
the data with current data from the port.
Click the Clear button to clear all of the counters to zero for the selected port and to
place an entry in the audit log indicating that statistics for the port have been cleared.
NOTE: Clearing the counters clears the statistics for all users.
For more information about the Performance View, including statistics descriptions,
refer to
Performance View on page
Status Bar
The status bar is located along the bottom of the Product Manager window. This
includes a symbol that displays at the left side of the bar and messages that display in
the panel to the right of the symbol. The symbol indicates the current operating status
of the switch and the messages display to provide more description of menu options as
you move the cursor over the options under menu bar menus. Refer to
page 1-31
for the meaning of these status symbols and of the corresponding alert text
that displays in the Edge-16 Status table at the top of the Hardware View in the view
panel.
1–30
Port Menu on page
2-31.
edge switch 2/16 product manager user guide
2-17.
Table 1–1 on
Advertisement
Table of Contents
