HP StorageWorks 2/16 User Manual page 53

Hp storageworks 2/16: user guide
Table of Contents

Advertisement

The Reason field on the switch Status table displays one of the following reasons
when there are no links.
Never Connected
A network connection was never established between the switch and the HAFM
server or the CTP card has failed. Check the IP addresses, the Ethernet local area
network (LAN) physical connection between the switch and HAFM server, and
other network connection conditions.
Note that the CTP card is not a FRU. If it fails, the switch must be replaced.
Link Timeout
The network connection that was established between the switch and HAFM
server has been lost. Check the IP addresses, the Ethernet LAN physical
connection between the switch and HAFM server, IP addresses, and other network
components.
Protocol Mismatch
The switch and the HAFM server are not at compatible software release levels.
Update the HAFM software version.
Duplicate Session
A link has previously been established between the switch and another instance of
the HAFM server. Connect to the previously established HAFM server from the
HAFM login screen.
Unknown Network Address
The address defined for the switch in the HAFM could not be found in the domain
name server (DNS). Either the name was mistyped when the switch was added to
the HAFM, or the name was not available from the DNS. Check the network IP
address for the switch definition in the HAFM by right-clicking the product icon
and selecting Properties. The IP address displays in the Network Address field.
Incorrect Product Type
The product at the configured network address is not a switch. Verify address,
configuration, and product type.
edge switch 2/16 product manager user guide
Monitoring and Managing the Switch
2–3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks edge 2/16 product manager

Table of Contents