Enable Telnet
Select this option from the Configure menu on the menu bar to place a check mark
in the check box to enable telnet access to the switch. Select the option again to
remove the check mark and disable telnet access. When disabled, users at remote
workstations cannot access the switch through telnet to use the Command Line
Interface (CLI) or perform other tasks. If enabled, hp recommends changing the
user names and/or passwords from their default values to prevent unauthorized
access.
Backing Up and Restoring Configuration Data
You can back up the NV-RAM configuration, which includes all of the data you input
through instructions in this chapter, using the Backup and Restore Configuration
option. This option is available through the Maintenance menu. Selecting this option
backs up the configuration data to a file on the HAFM server hard drive. The restore
function writes this data back to NV-RAM on the switch. Using the restore function
overwrites the existing configuration. For more information, refer to
Restore Configuration on page
In addition to the Backup and Restore Configuration option, the Iomega QuikSync
application backs up configuration and other critical data from the HAFM server
automatically. As long as a Zip disk remains in the Zip drive of the HAFM server, data
backs up to the Zip disk whenever the directory contents change or you reboot the
HAFM server.
NOTE: We do not recommend changing the default QuikSync settings.
edge switch 2/16 product manager user guide
5-6.
Configuring the Switch
Backup and
3–37