Clear System Error Light; Enable Unit Beaconing - HP StorageWorks 2/16 User Manual

Hp storageworks 2/16: user guide
Table of Contents

Advertisement

dialog box can also be displayed when you double-click the FRU in the Hardware
View. For details on these options refer to
page
2-7.

Clear System Error Light

Select this to turn off the amber system error LED, located below the green power
LED on the switch front bezel.

Enable Unit Beaconing

Click the check box to toggle unit beaconing on or off. When the check box has a
check mark, unit beaconing is on, and the amber system error light on the switch
front bezel blinks to help users locate the actual unit in an equipment room. When
you click the check box to remove the check mark, unit beaconing is disabled and
the amber LED goes out. You can only enable beaconing if there are no system
errors (the system error light is off).
Properties
Click to display the Switch Properties dialog box. This dialog box contains the
switch name, description, location, and contact person configured through the
Configure Identification dialog box. Also included is other product information as
detailed in switch Properties. You can also display this dialog box by
double-clicking an area on the illustration in the Hardware View, away from a
hardware component.
Close
Select this option to close the Product Manager window.
Configure Menu
Click on the Configure menu on the menu bar to display a menu that lists the
following options. For detailed information on using these options, refer to
Configuring the
Identification
Select this option to display the Configure Identification dialog box. Enter the
following information in this dialog box:
edge switch 2/16 product manager user guide
Switch.
Product Manager Overview
Displaying FRU Information on
Chapter 3,
1–15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks edge 2/16 product manager

Table of Contents