Configure Date And Time Periodic Synchronization Dialog Box - HP StorageWorks 2/16 User Manual

Hp storageworks 2/16: user guide
Table of Contents

Advertisement

If the Periodic Date/Time Synchronization check box in the Configure Date and
Time dialog box is selected, the HAFM server periodically synchronizes the
switch time to the HAFM
When the Periodic Date/Time Synchronization option is selected, the Date and
Time fields are disabled (grayed out).
If the Periodic Date/Time Synchronization check box is not selected, you can set
the HAFM server date and time manually.
Figure 3–15: Configure Date and Time Periodic Synchronization dialog box
To disable Periodic Date/Time Synchronization, click the check box to remove the
check mark, then click Activate. To re-enable Periodic Date/Time
Synchronization, click the check box to display the check box, then click Activate.
NOTE: Click Activate to synchronize the date and time at the next update period. Click Sync
Now to synchronize the date and time immediately.
2. Perform one of the following options:
Option 1: To immediately synchronize the switch date and time with the HAFM
server, click Sync Now. Make sure that a check mark is in the Periodic Date/Time
Synchronization check box.
NOTE: If you click Activate, the date and time synchronize at the next update period.
Option 2: To synchronize the switch date and time with a specific date and time
that you enter:
a. Make sure that Periodic Date/Time Synchronization is disabled (no check).
Refer to
edge switch 2/16 product manager user guide
server,
and daylight savings time automatically updates.
Figure
3–16.
Configuring the Switch
3–27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks edge 2/16 product manager

Table of Contents