Download Print this page

HP StorageWorks 2/16 User Manual: Rack Stability; Getting Help

Hp storageworks 2/16: user guide.
Hide thumbs

Advertisement

About This Guide

Rack Stability

WARNING: To reduce the risk of personal injury or damage to the equipment, be
sure that:
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
The stabilizing feet are attached to the rack if it is a single rack installations.
The racks are coupled together in multiple rack installations.
A rack may become unstable if more than one component is extended for any
reason. Extend only one component at a time.

Getting Help

If you have a problem and have exhausted the information in this guide, you can get
further information and other help in the following locations.
xvi
Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. If this surface
is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow the
surface to cool before touching.
Power Supplies or Systems marked with these symbols indicate the
equipment is supplied by multiple sources of power.
WARNING: To reduce the risk of injury from electrical shock,
remove all power cords to completely disconnect power from the
system.
Any product or assembly marked with these symbols indicates that the
component exceeds the recommended weight for one individual to
handle safely.
WARNING: To reduce the risk of personal INJURY or damage to the
equipment, observe local occupational health and safety requirements
and guidelines for manual material handling.
edge switch 2/16 product manager user guide

Advertisement

   Related Manuals for HP StorageWorks 2/16

   Related Content for HP StorageWorks 2/16

Comments to this Manuals

Symbols: 0
Latest comments: