Export Configuration Report - HP StorageWorks 2/16 User Manual

Product Manager Overview
Features
Displays the Configure Feature Key dialog box. Use this dialog box to enter a
feature key to enable optional features that you have purchased for the switch.
NOTE: The Configure Feature is not supported in this software version.
Date and Time
Select this option to display the Configure Date and Time dialog box. Use this
option to set the current date and time in the switch. When the Periodic Date/Time
Synchronization check box is checked, the Date and Time fields are greyed out
(disabled), and the HAFM server date and time periodically synchronizes the
switch date and time. If the Periodic Date/Time Synchronization check box is not
checked, you can set the date and time in the dialog box fields manually.
Threshold Alert(s)
Select this option to configure threshold alerts for ports. A threshold alert notifies
users when the transmit (Tx) or receive (Rx) throughput reaches specified values
for specific switch ports or port types (E_Ports or F_Ports). Using this option, you
can configure:
— A name for the alert.
— A threshold type for the alert (Rx, Tx, or either).
— Active or inactive state of the alert.
— Threshold criteria. This includes configuring the threshold as the percent of
port traffic capacity utilized (% utilization). You must also configure the time
interval during which the throughput is measured and the maximum
cumulative time that the throughput percentage threshold can be exceeded
during this time interval before an alert is generated.

Export Configuration Report

Select this option to display the Export Configuration Report dialog box, which
enables you to specify a file name in which to save an ASCII text file containing
all current user-definable configuration options in a printable format. Note that
this file cannot be read back into the Product Manager in order to set configuration
parameters.
1–18 edge switch 2/16 product manager user guide