This chapter describes how to use the options that display on the Product Manager's
Configure menu on the Product Manager menu bar.
Configure Identification
Use the procedure in this section to identify the switch by its name, description,
location, and contact person. This information displays in the following Product
Manager locations:
•
Product Manager window title panel (name).
•
Switch Properties dialog box (name, location, contact, description).
•
Identification table at the top of the Hardware View (name, location, description).
The name also displays in the switch icon label in the HAFM Product tab if the
product name is enabled through the HAFM Display Options.
Data entered through the following procedure is saved in nonvolatile random access
memory (NV-RAM) on the switch.
Procedure
To configure identification for the switch, use the following steps:
1. Select Identification from the Configuration menu on the menu bar.
The Configure Identification dialog box displays.
edge switch 2/16 product manager user guide
Configuring the Switch
3
3–1