Using Maintenance Features; Run Port Diagnostics; Swap Ports; Procedure - HP StorageWorks 2/16 User Manual

Hp storageworks 2/16: user guide
Table of Contents

Advertisement

This chapter describes how to use the options that display from the Maintenance menu
on the Product Manager menu bar.

Run Port Diagnostics

The Port Diagnostics option enables you to run internal and external loopback tests on
any port. To use this option, follow the detailed steps in the hp StorageWorks edge
switch 2/16 service manual (A7284-96002/AA-RS2JA-TE).

Swap Ports

S/390 mode only. Select Swap Ports to display the Swap Ports dialog box. Use this
dialog box to swap one port address for another. For example, if the current address
for port 0 is currently 04 and the address for port 1 is currently 05, you can swap so
that the address for port 0 has address 05 and port 1 has address 04.
NOTE: Make sure that the system administrator varies attached devices offline that are
attached to the ports whose addresses you are going to swap. Ports that you are going to swap
are blocked during this procedure, as swapping ports is disruptive to port operation.

Procedure

To swap ports, use the following steps:
1. Select Swap Ports from the Maintenance menu on the menu bar.
The Swap Ports dialog box displays.
edge switch 2/16 product manager user guide

Using Maintenance Features

5
5–1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks edge 2/16 product manager

Table of Contents