Table of Contents
Advertisement
Enable Web Server
Select this option place a check mark in the check box to enable the Embedded
Web Server interface on the switch. Select the option again to remove the check
mark and disable the Embedded Web Server interface. When disabled, users at
remote workstations cannot access the interface. If enabled, hp recommends
changing the user names and/or passwords from the default values to prevent
unauthorized access.
Enable Telnet
Select this option place a check mark in the check box to enable telnet access to
the switch. Select the option again to remove the check mark and disable telnet
access. When disabled, users at remote workstations cannot access the switch
through telnet to use the Command Line Interface (CLI) or perform other tasks. If
enabled, hp recommends changing the user names and/or passwords from the
default values to prevent unauthorized access.
Logs Menu
Click on the Logs menu from the menu bar to display a menu that lists the following
options. For detailed information on using these dialog boxes, refer to
Using
Logs.
Audit Log
This log provides a record of all configuration changes made on the switch. Each
entry displays the date and time of the change, a description of the change, the
source of the change (such as the HAFM server or SNMP management station),
and an identifier for the source, such as the IP address of the HAFM server or
SNMP management station.
Event Log
Select this option to display the switch event log. This log provides a record of
significant events that have occurred on the switch, such as hardware failures,
degraded operation, and port problems. Each entry includes the date and time of
the event, a reason code for the event, the severity level, a brief description, and
up to 32 bytes of supplementary event data. Refer to the hp StorageWorks edge
switch 2/16 service manual (A7284-96002/AA-RS2JA-TE) for more information.
edge switch 2/16 product manager user guide
Product Manager Overview
Chapter 4,
1–19
Advertisement
Table of Contents
