Table of Contents
Advertisement
Product Manager Messages
Table A–1: HP StorageWorks Edge Switch 2/16 Product Manager Messages
Message
Link dropped.
Log is currently in use.
Loopback plug(s) must be
installed on ports being
diagnosed. Press Next to
continue.
Maximum number of
versions already installed.
No file was selected.
No firmware version file was
selected.
No firmware versions to
delete.
Non-redundant switch must
be offline to install firmware.
Not all of the optical
transceivers are installed for
this range of ports.
Performing this operation
will change the current state
to Offline.
A–10
Description
Connection between HAFM
server and the switch has
been lost.
Log is in use by another
Product Manager.
External loopback
diagnostics require an
optical loopback plug to be
installed.
The maximum number of
firmware versions has been
reached.
Action requires you to select
a file
A file was not selected in the
Firmware Library dialog box
before an action, such as
modify or send was
performed.
There are no firmware
versions in the firmware
library to delete.
Since the switch has only a
single CTP card, it must be
offline to initiate a firmware
installation.
Some ports in the specified
range do not have optical
transceivers installed.
This operation causes the
switch to go offline.
edge switch 2/16 product manager user guide
Action
Wait for the connection to
re-establish. Link
re-connects are attempted
every 30 seconds.
Retry the operation later.
Ensure that an optical
loopback plug is installed in
port optical transceiver
before running external
wrap diagnostic testing.
Delete a firmware version
before adding a new
firmware version.
Select a file.
Click a firmware version in
the dialog box to select it,
then perform the action
again.
N/A. An informational
message.
Take switch offline and try
again.
Use a port range that is valid
for the ports installed.
N/A. An informational
message.
Advertisement
Table of Contents
