Table of Contents
Advertisement
Displaying Node Properties
Open the Node Properties dialog box by double-clicking a row in the Node List View
or right-clicking a row and selecting Node Properties from the menu. You can also
display this dialog box by right-clicking on a port in the Hardware View, right-clicking
on a port's row in the Port List View, or right-clicking on a port's bar graph in the
Performance View and selecting Node List from the menu. In addition, you can display
this dialog box by clicking to select a port, port row, or port bar graph in the preceding
views and selecting Node Properties from the Port secondary menu on the Product
menu of the Product Manager menu bar.
NOTE: If a node is not logged in, a message appears indicating that node information is not
available.
Figure 2–14: Node Properties dialog box
•
Port Number
The physical port number on the Switch to which the node is connected.
•
Port Address (S/390 mode only)
The logical port address.
NOTE: The field only applies during S/390 mode and does not display in open systems mode.
•
Node Type
Type of node which is supplied from the attached device.
•
Port WWN
Port world-wide name of the attached device.
edge switch 2/16 product manager user guide
Monitoring and Managing the Switch
2–29
Advertisement
Table of Contents
