Table of Contents
Advertisement
2. To change the state, select the alert information in the table.
3. If the alert is active, select Deactivate to change to the inactive state. If the alert is
inactive, select Activate to change to the active state.
Delete Alerts
Use the following steps to delete existing threshold alerts.
1. Select Threshold Alerts from the Configure menu.
The Configure Threshold Alerts dialog box displays.
2. Select the alert that you want to delete by selecting the alert information in the
table.
3. Select Delete.
A message displays asking you to confirm the deletion.
4. Select Yes.
The alert is removed from the dialog box.
Export Configuration Report
Use this option to save an ASCII file of all currently saved configuration data in
switch NV_RAM to your hard drive or a diskette. Use any desktop publishing
application to import this ASCII file for viewing or printing.
NOTE: This file cannot be used to set configuration parameters through the Product Manager.
Data in the file includes:
•
Product identification
Data input into the Configure Identification dialog box.
•
Operating parameters
Data input into the Operating Parameters dialog box.
•
Port parameters
Data input into the Configure Ports dialog box.
•
SNMP parameters
Data input into the Configure SNMP dialog box.
edge switch 2/16 product manager user guide
Configuring the Switch
3–35
Advertisement
Table of Contents
