Modify An Alert; Activate Or Deactivate Alerts - HP StorageWorks 2/16 User Manual

Hp storageworks 2/16: user guide
Table of Contents

Advertisement

Configuring the Switch

Modify an Alert

Use the following steps to modify an existing threshold alert configuration.
1. Select Threshold Alerts from the Configure menu.
The Configure Threshold Alerts dialog box displays.
2. Select the alert that you want to modify by clicking the alert information in the
table.
3. If the alert is active, select Deactivate, then select the alert information in the table
again.
4. Select Modify.
NOTE: If the alert is active, an error message displays prompting you deactivate the alert.
An initial Modify Threshold screen appears where you can change the threshold
type.
5. Select a threshold type from the drop-down list.
6. Select Next when you are done. A Modify Threshold screen appears where you
can change the % utilization, cumulative minutes for the threshold to occur before
notification, and the time interval for measuring throughput and for alert
notification.
7. Make appropriate changes, then continue through the Modify Threshold screens,
making changes as necessary, until the summary screen appears displaying the
alert configuration.
8. Perform either of the following steps:
If you need to change any parameters, select Previous and Next to display the
desired Modify Threshold screen.
Select Finish when you are done.

Activate or Deactivate Alerts

Use the following steps to activate or deactivate existing threshold alerts. In the active
state, notifications are generated for the alert. In the inactive state, notifications do not
occur.
1. Select Threshold Alerts from the Configure menu.
The Configure Threshold Alerts dialog box displays. The port's current state,
inactive or active, is listed under the State column.
3–34
edge switch 2/16 product manager user guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks edge 2/16 product manager

Table of Contents