Using Logs
Identifies the user making the change through the switch Product Manager and IP
or DNS host name address of the remote user's workstation.
— Maintenance Port: Change was made by a user connected to the maintenance
port.
— HAFM: Change was made by an Product Manager user.
— SNMP: Change was made by a remote SNMP management station.
— Fabric: Change was initiated by another switch in the fabric that is not
managed by this HAFM server.
— Web server: Change was made by a user through the Embedded Web Server
Interface.
— Telnet: Change was made through a telnet connection.
— Fibre Channel Host: Change was made inband by a Fibre Channel host
through the Open Systems Management Server or FICON Management
Server.
•
Identifier
Identifies the user making the change according to the source:
— Maintenance Port: No entry displays.
— HAFM: Includes user@address, where "user" is the Product Manager user
name and "address" is the network address of the workstation (remote user
workstation or HAFM server).
— SNMP: Contains the network address of the SNMP management station.
— Fabric: No entry displays.
— Web Server: The Identifier column contains user@address, where "user" is
the web server user name and "address" is the network address of the web
user.
— Fibre Channel Host: No entry displays.
— Telnet: Change was made through a telnet connection.
Event Log
The event log provides a record of significant events that have occurred on the switch,
such as hardware failures, degraded operation, and port problems.
4–4
edge switch 2/16 product manager user guide