Table of Contents
Advertisement
Product Manager Overview
Window Layout and Function
The main Product Manager window is divided into four main areas as shown in
Figure 1–5 on page
in these panels to configure switch operation, monitor performance, and access
maintenance features.
Menu Bar
The menu bar on the Product Manager window displays tabs for the following menus:
•
Product
•
Configure
•
Logs
•
Maintenance
•
Help
Click one of the tabs to display a list of menu options. Click an option to open a dialog
box that allows you to perform configuration and maintenance tasks and view logs. If
a menu option contains a check box, click in the box to add a check mark and enable a
function. Click a check box containing a check mark to remove the check mark and
disable the function.
Product Menu
Select one of the following options from the Product menu.
Port
This provides a secondary port menu only when the Hardware View, Port List
View, or Performance View displays in the view panel. To use this menu for a
specific port, click a port in the Hardware View, a port's row in the Port List View,
or a port's bar graph in the Performance View. The menu contains options which
are identical to those that display when you right-click the port, port row, or port
bar graph in those views. For detail on these options refer to
page
2-17.
FRU
Click a power supply module or cooling fan module in the Hardware View only
and select FRU from the Product menu to display the FRU Properties menu
option. These displays the properties dialog box for the FRU. The FRU Properties
1–14
1-13: menu bar, view tabs, view panel, and status bar. Use features
Port Menu on
edge switch 2/16 product manager user guide
Advertisement
Table of Contents
