This option displays the Save Data Collection dialog box. Use this dialog box to
collect maintenance data into a file. This file is used by support personnel to
diagnose system problems. Refer to the hp StorageWorks edge switch 2/16 service
manual (A7284-96002/AA-RS2JA-TE) for instructions.
Select this option to initiate an initial program load on the switch. A dialog box
displays to allow you to confirm the IPL. Note that an IPL does not affect any
configuration settings done through the Product Manager. Port operation is
interrupted during the IPL.
Refer to the
Set Online State
Select this option to display the Set Online State dialog box. Use this dialog box to
change the online state of the switch to offline or online.
Select this option to display the Firmware Library dialog box. This dialog box
displays all firmware versions currently installed on the HAFM server that can be
downloaded to switches. Use this dialog box to add a new firmware version to the
HAFM server hard disk, modify the description displayed for an existing version,
delete a version from the PC, or download (send) a version for operation on a
switch. For additional information on using this option, refer to the hp
StorageWorks edge switch 2/16 service manual (A7284-96002/AA-RS2JA-TE).
Enable E-Mail Notification
The Simple Mail Transfer Protocol (SMTP) server and e-mail recipient addresses
are configured in the HAFM application (not in the switch's Product Manager).
E-mail notification is also initially enabled in the HAFM for all switches managed
by the HAFM. Note, however, that the E-Mail Notification option on the Product
Manager's Maintenance menu must be enabled (checked) for e-mail notification
to occur for the specific switch.
The default setting for the Enable E-Mail Notification function is enabled
(checked). To disable the function, select Enable E-Mail Notification from the
Maintenance menu to clear the check box.
edge switch 2/16 product manager user guide
Execute an IPL on page 5-2
Product Manager Overview
for more information.