Measured Value Display; Menus And Dialogs - wtw inoLab Multi 9310 IDS Operating Manual

Operation
22
Operating Explanation
mode
Storing in The meter stores measuring data automatically or manually
memory
Transmit- The meter transmits measuring data and calibration records
ting data to a USB-B interface automatically or manually.
Setting The system menu or a sensor menu with submenus, set-
tings and functions is displayed

4.5.2 Measured value display

In the measured value display, you can
 open the menu for calibration and measurement settings with
(short keystroke)
 open the system menu with the sensor-independent settings by pressing
<ENTER>
Storage & config for a
2 s).
 change the display in the selected measuring screen (e. g. pH ><− mV) by
<M>
pressing .

4.5.3 Menus and dialogs

The menus for settings and dialogs in procedures contain further subelements.
The selection is done with the
played with a frame.
 Submenus
The name of the submenu is displayed at the upper edge of the frame. Sub-
menus are opened by confirming with
System
General
Interface
Clock function
Service information
Reset
03.04.2013
Back
 Settings
Settings are indicated by a colon. The current setting is displayed on the
right-hand side. The setting mode is opened with
the setting can be changed with
<ENTER__>
< >< >
  keys. The current selection is dis-
<ENTER>
08:00
< ><
 
®
inoLab Multi 9310 IDS
<ENTER>
long keystroke, approx.
. Example:
<ENTER>
. Subsequently,
> <ENTER>
and . Example:
ba75937e10 08/2021