®
inoLab
Multi 9310 IDS
Switch on the printer
Switch printer off
ba75937e10
08/2021
13
Printer (only Multi 9310P IDS)
2
1
1 Operating LED
– Is illuminated: Printer is switched on
– Flashes: Printer is switched off
2 Control panel with the keys
3 Lever to open the paper compartment
4 Lid of the paper compartment
13.1 Commissioning / switching the printer on or off
1.
Connect the power pack to the Multi 9310P IDS.
The LED lights up green. The printer is ready for operation.
or
When the printer had been switched off (LED flashing):
Switch on the printer with
The LED lights up green. The printer is ready for operation.
If there is a USB-B connection at the same time (e.g. to a PC), the
data are output to the PC only.
1.
Switch off the printer with
The LED flashes. The printer is switched off.
Printer (only Multi 9310P IDS)
3
<FEED>
<ON/OFF>
and
<ON/OFF>
.
<ON/OFF>
.
4
93