Multilab Importer - wtw inoLab Multi 9310 IDS Operating Manual

®
inoLab Multi 9310 IDS
Starting the program
for the data
reception
Transmitting data
(options)
ba75937e10 08/2021
3. On the PC, start the program for the data reception, e.g.:
 MultiLab Importer (see section 12.2 M
 Terminal program
Data Control
Current Manual
measured
values of all
connected
sensors
automatic, at
intervals
Stored mea- Manual
sured values
calibration Manual
records
automatic
The following rule applies: With the exception of the menus, shortly
pressing the
contents to the interface (displayed measured values, measuring
datasets, calibration records).

12.2 MultiLab Importer

With the aid of the MultiLab Importer software, you can record and evaluate
measurement data with a PC.
More detailed information can be found in the MultiLab Importer
operating manual.
Operation / description
<F2>
 With
 Simultaneously with every manual
data storage process (see section 11.1
M
ANUAL DATA STORAGE
<F2__>
 With
Then you can set the transmission
interval.
 Simultaneously with every automatic
data storing process (see section 11.2
A
UTOMATIC DATA STORAGE AT INTER
, page 85).
VALS
 Displayed dataset with
put] after calling up from the data stor-
age.
 All datasets with the Output to RS232/
USB function.
(see section 11.3.1 M
MEASUREMENT DATA STORAGE
87).
 Calibration record with
output] (see section 5.2.7 C
, page 36; section 7.3.5 C
DATA
TION DATA
IBRATION DATA
 At the end of a calibration procedure.
<F2>
/[USB output] key generally outputs the display
Transmitting data
L I , page 91)
ULTI AB MPORTER
/[USB output].
, page 84).
[USB output].
<F2>
[USB out-
ANAGING THE
, page
<F2>
/[USB
ALIBRATION
ALIBRA
, page 52; section 8.3.6 C
, page 60).
-
-
-
AL
91