Measured Value And Status Display - wtw DIQ/S 182-PR System Operating Manual

Operation
Example:
Display options
with two connected
sensors
4 - 2
4.2

Measured value and status display

m
With the key you switch to the last selected measured value and
status display from any operating situation. Entries that are not
completed are ignored while doing so.
m
By pressing once again you cyclically switch between further
display options.
Operating notes
 Select a sensor in the double display with
is displayed in reverse video. The number and name of the selected
sensor are displayed in the header. In the single display, the sensor
being displayed is always the selected sensor at the same time.
 Start a calibration procedure for the selected sensor with
Starting a calibration procedure from the display of interfaces is not
possible.
Big double display:
Main measured parameter only.
Detailed double display:
Main and secondary measured
parameter.
Single display.
The display switches between the
connected sensors every
3 seconds.
Display of the interfaces.
Either:
Date and time and the current
states of the relays.
w
Or (switchable with
State of the PROFIBUS
communication.
w
. The selected sensor
ba75503e07
System 182
):
c
.
04/2012