What To Do If - wtw inoLab Multi 9310 IDS Operating Manual

®
inoLab Multi 9310 IDS
Integrated printer
does not print
Printer operating -
paper not being
printed
Integrated printer
prints automatically
ba75937e10 08/2021
Use original WTW rolls of paper only.
You will find information on this in the WTW catalog L
F I
AND IELD
The thermal paper will remain legible for at least 7 years if stored
appropriately.
13.5 What to do if... / printer
Cause
– Printer switched off
(LED flashing)
– No power pack connected
– USB cable connected
– Function "store automatically at
intervals" with long intervals is
switched on
– No paper available
Cause
– Paper inserted the wrong way up
Cause
– The function "store automatically
at intervals" or "transmit data
automatically at intervals" is
switched on
or on the Internet.
NFORMATION
Remedy
– Switch on the printer
(LED illuminated)
– Connect the power pack
– Disconnect the USB cable from the
meter
– Switch off the function (see section
11.2 A
INTERVALS
– Insert a roll of paper
Remedy
– Turn the roll of paper around and
insert it with the other side upwards
Remedy
– Switch off the functions (see sec-
tion 11.2 A
AT INTERVALS
section 12 T
page 90)
Printer (only Multi 9310P IDS)
ABORATORY
UTOMATIC DATA STORAGE AT
, page 85)
UTOMATIC DATA STORAGE
, page 85 or
RANSMITTING DATA
,
95