®
inoLab
Multi 9310 IDS
ba75937e10
08/2021
measured parameter in the measured value display and press the
key.
10.7.2 Resetting the system settings
The following system settings can be reset to the default condition:
Setting
Language
Audio signal
Baud rate
Output format
Decimal separator
Contrast
Illumination
Shutoff time
Temperature unit
Stability control
The resetting of the system settings is done in the menu Storage & config /
System / Reset. To open the menu Storage & config in the measured value
<ENTER__>
display, press the
Default settings
English
on
4800 Baud
ASCII
.
50
Auto
1 h
°C
on
key.
Settings
<ENTER>
83