Data Storage; Manual Data Storage - wtw inoLab Multi 9310 IDS Operating Manual

Data storage

When the storage is
full
84
11 Data storage
You can transmit measured values (datasets) to the data storage:
 Manual data storage (see section 11.1 M
 Automatic data storage at intervals (see section 11.2 A
, page 85)
AGE AT INTERVALS
Each data storing process transmits the current dataset to the USB interface.

11.1 Manual data storage

You can transmit a measurement dataset to the data storage as follows. The
dataset is at the same time output to the interface:
<STO>
1. Press the
The menu for manual data storage appears.
Manual data storage 4 von 494
03.04.2013 07:43:33
pH 7.000 24.8 °C AR +++
ID number:
continue
03.04.2013
Back
08:00
2. If necessary, change and confirm the ID number (1 ... 10000) with
< >< > <ENTER>
  and
The dataset is stored. The meter switches to the measured value dis-
play.
When all storage locations are occupied, it is not possible to continue storing.
Then you can e.g. transmit the stored data to a PC (see section 11.3.1 M
ING THE MEASUREMENT DATA STORAGE
data storage (see section 11.3.2 E
page 88).
ANUAL DATA STORAGE
key shortly.
1
.
, page 87) and subsequently erase the
RASING THE MEASUREMENT DATA STORAGE
®
inoLab Multi 9310 IDS
, page 84)
UTOMATIC DATA STOR
ANAG
ba75937e10 08/2021
-
-
,