®
inoLab
Multi 9310 IDS
Settings
ba75937e10
08/2021
You can change the interval (1 ... 999 days):
1.
Open the menu for measurement settings with
2.
In the Calibration / Calibration interval menu, set the calibration interval
<
><
>
with
.
3.
Confirm the setting with
4.
Quit the menu with
10.2 ORP measurement settings
10.2.1 Settings for ORP measurements
The settings are made in the menu for measuring settings of the ORP measure-
ment. To open the settings, display the required measured parameter in the
measured value display and press the
settings, switch to the measured value display with
Default settings are printed in bold.
Menu item
Possible setting
mV resolution
0.1
1
Reset
-
10.3 D.O. measurement settings
10.3.1 Settings for D.O. sensors
(menu for measurement and calibration settings)
The settings are available in the menu for measurement and calibration set-
tings. To open the settings, display the required measured parameter in the
measured value display and press the
settings, switch to the measured value display with
Default settings are printed in bold.
Menu item
Calibration /
Calibration record
Calibration /
Calibration data
storage / Display
<ENTER>
.
<M>
.
<ENTER>
Explanation
Resolution of the mV display
Resets all sensor settings to the
delivery condition (see section
10.7.1 R
MENT SETTINGS
<ENTER>
Possible
Explanation
setting
Displays the calibration record of
-
the last calibration.
Displays the last calibration records
-
(max. 10)
Settings
<ENTER>
.
key. After completing the
<M>
.
ESETTING THE MEASURE
, page 81).
key. After completing the
<M>
.
-
73